Counting matching models…
Update 2 (8/22/25) It's here! Version 2.0 of the riser with tighter fitting vents that release easier and a tool hole to release the vents. I've also put in tabs to hold LED strips. Thanks to my fellow Elegoo Discord server members for…
I wanted a simple and quick to print tool caddy, that can hold all the included tools for the Centauri Carbon printer. Plus a pair of flush cutters. The tools are organized, with the most frequently used tools towards the front. The…
Snap in place - Removable poop chute for the Elegoo Centauri Carbon. Poop chute which snaps in place with magnets. The poop chute “floats” and is connected to the printer, which comes in handy with the anti-vibration feet installed. No…
All variant have holes for magnets 1,5x⌀10mm or you can use 2.0x⌀10mm, except for the 3x⌀6mm model. Update 12-09-2025 - Added internal model !! Prototype !! Magnetic version to be used inside, if you want to use the internal spool holder…
Added a V2 of the spool barrel. Added a knurl knob to the end because I was having trouble removing the nut without being able to fit my hand between the spool and the printer to hold the barrel. Review the last photo to see the changes I…
Updates: After printing mine, I realized my 6mm x 2mm magnets were too weak. The heater is held to the wall but uses the power cord to stay up, added a 10mm and 8mm magnet version Added a clearance hole for the heater button Added a 2mm…
All the side-mounted holders for the Elegoo Centauri Carbon glass top plate I have seen so far feature top-entry. It does not work for me, so I designed this side-entry mount instead. Provided as a combined STEP file. Easy to remix and…
I wanted to build a poop container for my Centauri but didn't like the idea of having to rebuild something else once the ams came out for it. Since I already had one of the “(The original) Bambu lab segmented poop chute pipe” models on my…
This is a low riser revision of the model I linked. But I also took from this model and used their connector links https://www.printables.com/model/1257300-elegoo-centauri-carbon-led-riser . This model is a remix of the two of them with…
Remix of Wolf_Prints remix of the model from Uncle Jessy's HEPA filter vent for the Elegoo Centauri Carbon. I'm intending to use this with an original design adapter to a flexible dust collector hose. Wall thickness of the cylindrical…
This is a simple, practical design for a waste collection box specifically made for the Elegoo Centauri Carbon 3D printer. The box is designed to catch "poops" debris during printing. No supports needed: The design is optimized for easy…
Purge bin with drawer, makes it easier to empty for material. Mainbody needs Tree support Drawer is without support
Also available through the opencentauri CAD github Live interactive model you can link into Fusion 360 on the Opencetauri Docs . Community Centauri Carbon CAD model with many contributions from in the Opencentauri server as well as…
Can make out of any filament. To clear the poop, you must remove the entire chute. To do this, simply lift up and pull away. 41048.38896 mm³ No supports needed if you choose that file
UPDATE: Fixed alignment issue. This file is for the version of the cap without the slot for a wire to run through. I haven't printed a version of this without the slot, as my included mount is fine. If you'd like the slotted version, it's…
All of the sensor offset mounts I could find were based on the original Elegoo CC design with 2 screws. Lots of people now have the one w/ a flap and 1 screw, including myself. So i made one. Only tool you need was provided w/ the…
Are you tired of only being able to open your Elegoo Centauri Carbon enclosure from one side? Say goodbye to awkward reaches and hello to comfort! If you found this useful, consider leaving a tip – it really helps! Printer Brand: Elegoo…
Jan_P's creation, but with hotend hoders. You can select the number of hotends. This sits on the right side of the printer.
I changed the holes so you don't need some crazy screwdriver or additional holes through the other side for the screwdriver to reach the screws to mount it. Now you simply loosen the screws a little and slip the slide on. This is a little…
What's New in Version 2: Standard 4mm Support: Added a second set of files with a 3.8mm hole specifically designed for 4mm OD PTFE tubing, which is the most common size in the 3D printing community. Slot Design: I replaced the closed hole…
Before you grab this one, check out v3.6 . v3 of the internal spool holder. For the most recent compact version with a truncated end stop, I've added 2mm of length. This will work fine for anyone with a 7.5mm spacer or larger. It will…
A set of vibration dampener feet for the Centauri Carbon. I adjusted the feet to fit the CC. The original model had a curved bottom which resulted in slipping across the desk. I flattened the bottom and added screw holes to allow non-slip…
Description Fully tested scratch design inspired by the Sherpa mini -inspired design! This extruder replaces the stock centauri carbon extruder and allows use of a Bambu Lab clone hotends with swappable nozzles (commonly sold as TZ2.0,…
Designed like my Core One version, this is a more rugged vent to mount on the back of your Centauri carbon. Unlike the Core Ones nice bolt pattern on the back, the Centauri Carbon has a wonky 3 bolt design for mounting, which poses a…
Uses the original model and adds in a USB sized handle to make for easier storage and purchase when in use.
NOTE 2/01/26: Tool works great on the Centauri Carbon 2. Just received my CC2 and the back right corner was lower than all the other 4 corners. UPDATED MODEL : Since this tool seems to be helping people get the bed aligned I made some…
If you do not want to unload the filament this model is perfect for you
SE3D Toolhead Cover for Elegoo Centauri Carbon Before you grab this version, check out v2.0 . This is a redesigned toolhead cover for the Elegoo Centauri Carbon that improves both print quality and day-to-day usability. Key improvements:…
A remix of SE3D model. (14Jun26) New folder organization (25May26) Added frontSkeletonCanvas, frontSkeletonCanvasNotFanScrews and frontVCanvas. Need 5x3mm magnet. Three preliminary front covers for Canvas compatibility. The second cover…
I recently installed the sliding riser with PTFE tube relocation , but I wasn’t happy with how the tube would push back out of the enclosure. It rattled against the back of the machine and sometimes even hit the wall behind the printer…
I replaced the silicone nozzle wiper in my Elegoo Centauri Carbon as part of the machine maintenance, but rather than throw the old one in the bin again I turned it into a simple manual nozzle wiper brush. Worn out silicone wipers are…
Before you grab these , check out v2, which includes all three mounts with a stronger design. Functional replacement for the OEM support. The original is a glass-filled polymer and had begun to crack on both of my Centauri Carbon systems.…
The stand lets you install the heater to either blow upward or blow downward in your machine. Deflector only sits on top of the heater as its facing upward blowing heat towards the top glass. Nothing fancy. The tolerances were perfected…
The centauri carbon has a chamber thermistor that is mounted to the frame with a steel screw and plastic spacer. The steel screw is thermally conductive enough to significantly skew chamber temperatures colder. I found that the built in…
🚀 Support My Work 🚀 If you enjoy my designs, you can help me keep the creative spark alive: Post a Make: Seeing your prints is the best reward! It also helps me earn Prusameters to keep the filament flowing. 💎 Like & Download: Your…
This is a Skadis Board for your Centauri Carbon. It's mounted to its side Panel with the original screws. No supports required. A brim might be nessecary depending on filament. Have fun.
Spool Holder Assembly Instructions for 3D Printer Remove screws from enclosure Remove 3 screws from enclosure - right side of machine (down back corner and 2 neighbors) Insert the bearings onto the rollers Place the bearings onto the…
thicker side panel spacer, also change the length of the hinges for the side panel. And the reel mounting assembly and reel roller. the hinge parts for the side panel are the same as original. The reel mounting support is printed to…
These are replacement/extension links for the Elegoo Centauri Carbon cable chain. I modeled them based on the original chain to help fix the tight bend radius at the toolhead. A lot of people on Reddit and Discord have noticed that the…
This is alternative design for ECC door and top cover handle. Print without supports. 17.02.2026 - updated reinforced version - thicker walls,
Remixed Helixios's nice model to add a 1.5mm rad to the PTFE protrusion, to reduce risk of cracking. I also changed the PTFE protrusion to use M6 threads which is the PTFE adapter I have available. I personally printed mine vertically in…
Elegoo Centauri Carbon LED light at nozzle height I wanted light at nozzle height that would not be obscured by the print head. Electrical work on the printer is at your own risk! I accept no responsibility for damage! I believe I have…
Background Since JLCMC was my only alternative to AliExpress to order the right sized shafts at a reasonable price, I ordered the whole parts package there to reduce costs. The toothed Idlers fit fine but the smooth ones didn't fit at…
This is a gasket assembly that fits the linked low-profile risers for the Centauri Carbon printer - form fit, no glue. Mainly for CC users who want to contain fumes better. I wanted to print high temperature filaments with some toxicity…
I despise M2 screws. They're impossible to install. They use a 1.3mm hex that strips if you look at it wrong. This remix gets rid of the M2 screws and uses 2x of the existing screws from the OEM assembly. The intake and fan mount slide…
ATTENTION! Before reporting this design again as copy of someone else because this looks similar please try to make your own version that doesn't look similar. You can't change the mounting points, filament path or nozzle height if you…
New look for ECC touch screen. Printed in PETG, layer 0.16 and no support. Printed in the position as it is in the file.
Why is there yet another Internal spool mod? For one simple reason: This one doesn't require a panel spacer And since the space inside is very limited it uses a latch to hold the spool from the inside, this was tested with elegoo…
Tool for remove the XH 2pin connector nozzle heater of centauri carbon Updated (16Feb26): Added New puller for ZH 2pin with printed spring. Updated (15Jan26): Added New puller for XH 2pin with printed spring. This version prevents the…
Some Elegoo Centauri Carbon printers have a problem with offsetting the X and Y coordinates after a manual pause. This may be a slicer issue, depending on the G-code used. This is a simple test to see if it is happening to you. It is a 1…
This is a TPU top seal for the 'Elegoo Centauri Carbon Vented Riser' by JesusFreak. Printing notes You will need to print 4 total panel seal pieces and 4 of the corners, like JF's model these are directional, but unlike JF's model, they…
Simple holder to store the NOGA deburring tool directly on the Elegoo Centauri Carbon using an existing case screw.
I originally designed a version of this before I had my printer in hand, only to realize the fitment wasn't quite right. Now that I’m up and running, I’ve completely overhauled the model into a fully functional, tested version that…
This is a model for the Centauri Carbon to mount the EBB36 Gen 1 to the top side of the tool head and keep full range of motion. It uses the stock screws for the original usb cable as well as the drag chain. the EBB36 mounts with M3x6…
Adds character and protects the side panel of your Centauri Carbon against the spool rubbing while printing. 4 Models Available: Radioactive Sign Bike Sprocket Circular Saw Blade Involute Gear Fits snuggly to the spool holder. *Filament…
This print allows you to unlock the corner of your Centauri Carbon's print bed, by creating a removeable sturdy post that allows you to cut your filament automatically, and print in the corner without obstructing the filament cutter…
Description Here is a mounting solution for Chitu Systems Mini Heater H2 inside the Centauri Carbon. Installation This mounts to the M3 threaded hole located on the left side of the printers base. I used Fleeeinlan3D's version of SE3D's…
What do these blocks do? They allow the use of toothed idlers that will drastically reduce belt pitch vfa Can reduce rattling noise on fast accelerations (seems to depend on material used for printing) Easy servicability of belts and…
If you need a model of the bimetal nozzle with or without threads. Here you go! ############### Elegoo Centauri Carbon Modell der Bimetall-Düse Falls ihr ein Modell der Bimetall-Düse mit oder ohne Gewinde braucht. Bitte schön!
There is another more beautiful model for this purpose, but it uses too much filament for my taste. This is a much simpler design that you can print in 10 min. It just creates a 10mm gap with the side panel. You just need two M4 inserts…
Threw this together in TinkerCAD super fast because I have no clue how to design with real CAD programs. Wanted something without magnets as I'm not a fan. The stock screws work well now, just make sure you screw them in and out a couple…
Batman fan covers for Elegoo Centauri Carbon. Better results with 0.2mm Nozzle
Function: The Centauri Plate Vault is a precision-engineered, horizontal storage solution designed to house up to five PEI build plates. It is specifically optimized to utilize the vacant space beneath the Elegoo Centauri Carbon (when…
i make this to support my Caliper to the CC below the tools using the 2 original screws that came with it. feel free to remix if you want, this is my first ever own desing and surely can be improve.
Purge Waste Ramp and Collection Bin – Elegoo Centauri Carbon 2 This model consists of a guiding ramp and a collection bin , designed to channel and collect purge waste from the Elegoo Centauri Carbon 2 . The ramp guides purge material…
Elegoo Centauri Carbon Vented Riser Lock. Fits ECC Vented Riser from JesusFreak I remixed this from Squeemeister This lock holds the vent closed or open. Uses raised wedges on the top of each end to mechanically hold itself in place. Two…
🇫🇷 Description (Français) Porte-outils magnétique – Centauri Carbon 2 (CC2) Ce porte-outils a été spécialement conçu pour la Centauri Carbon 2 afin de garder tous les outils essentiels toujours à portée de main. Il est équipé de 8 aimants…
I created a base for the Elegoo CC1 in the same design style, featuring two drawers. One drawer is connected via a chute to the nozzle waste, so the nozzle “POOP” falls directly into it, and the entire drawer can be emptied from the…
Case for the Elegoo Centauri Carbon USB stick that comes with the printer. Prints in ~10 minutes and uses ~1 gram of filament and just slides on. Works fine in PLA, I have not tested it in anything else. Please comment if this was helpful…
Inspired by @dinkdoodlez tool caddy. I really liked the small footprint that model has. I started from scratch, here are the significant changes I made: Tool holders (drivers and allen keys) have indents for better retention Skadis hooks…
I fixed lance's models issues mentioned in the comments: Closed the hole Leveled the outer surfaces to reduce the amount of support material needed Print instructions: Turn supports on Print with it's back on the plate Use PETG or some…
This simple insert fits inside a standard reel of Sunlu filament and allows it to mount securely on the Elegoo Centauri Carbon 2 Combo printer. In my experience, not all Sunlu reels have identical internal diameters, but most include a…
Since I wanted to use the silencer for my printer made by B M A, but I did not want to scratch my printer, bam. A gasket
This is an adapter so you can hook up the FumeClear FC-2001S to the exhaust of the Elegoo Centauri Carbon. The fume extractor can be found HERE If you do not like this option i have created a replacement top for the FC-2001S so it can…
I wanted to keep all the accessories and nozzles for my Elegoo Centauri Carbon in one place, but I couldn’t find any design that included everything, so I made this remix to store it all. That’s why I used the hotend storage box by…
Hi, I noticed some parts of my bed that was not adhering correctly. I made this file to test and indeed the top right side was not correct. After a total reset of the printer and a good bed cleaning everything went back to normal. If you…
The new Elegoo Centauri Carbon 2 with the 350C print head is out. They changed the location of the poop chute. Luckily you can mirror the model and it will hang from the two screws and open to the left side of the printer instead of the…
Does your cc do a really good job of printing in mid-air when filament has run out? well this guy is going to help! I noticed the slop in the shaft (shown in first gif) was allowing the arm to slightly move away from the sensor, causing…
🛑 THIS MODEL HOUSES THE INTAKE AND EXHAUST FAN. TO AVOID RECIRCULATION / BURNOUT, MAKE SURE TO DISABLE THE INTAKE FAN WHEN USING THIS. 🛑 This exhaust vent mounts to the back of the Centauri Carbon using 3 M3*8 mm bolts. The exhaust vent…
If you use an internal spool holder, this PTFE tube plug is suitable for you.
Elegoo Centauri Carbon PTFE Guide holds the PTFE at the correct angle to feed filament through the filament sensor from under the spool vs over the top of the spool, as the factory designed. I made this because I am using a ball bearing…
My Elegoo Centauri Carbon printer use to bounce around. I used the original model successfully. When my new Carbon 2 arrived, the feet no longer fit. I adjusted the rigid part of the model and kept the TPU model the same. I printed the…
Elegoo Centauri Carbon - Nozzle Holder - Gridfinity 1x1 - 16 Nozzles
This part should be printed in TPU or other flexible type materials Covers for the feed sensor holes if you want to relocate the sensor inside the printer For the screw hole that holds the sensor on, you can just thread the stock screw…
Removed the blade guard from the model for less air resistance, adjusted the thickness of the duct a tiny bit to avoid crashing and belt rubbing. You can use the stock phillips screws for the faceplate or you can use these M3 x 14MM…
Added three different options: Front-Right panel that includes a hole for a thermostat/thermometer ( Aliexpress link ). Back-Right panel With a hole for PTFE adapters ( Aliexpress link PC4-01 ). With a hole for the above PTFE adapters and…
Uses 2 8x24x8 bearings uxcell 628-2RS Deep Groove Ball Bearings Z2 8mm X 24mm X 8mm Double Shielded Carbon Steel 2pcs: Amazon.com : Industrial & Scientific
I was inspired by the ECC bearing cover here. Especially after the first one of the bearing covers I tried to install fell into the adjacent hole. So, after a couple of quick measurements, I designed this hole cover in TinkerCAD. A pair…
This is my version of existing version for cover holder with tools, 1 from 2 of set (RIGHT). It's full compatible with left holder from model set that i used to remix, so you need to download LEFT part from original set. I solved my…
I resized the original model so it doesn’t collide with the Z‑axis bed supports. (Note: the bed will still crash at its maximum extension, so remove the mod if you plan to print at full height.) I also added holes for 8×3 mm magnets.…
I had the original hinges installed and really liked them. But, I installed a heater with the 7.5mm panel spacer that provides relief for the heater cables . After intalling the spacer on the left side of my printer ( my choice ), I…
The Elegoo Centauri Carbon 2-Spool Adapter is a functional hardware modification designed to adapt the printer's stock spool holder to accommodate 63mm spools . The design utilizes a flanged, slotted cylinder to provide a fit for various…
I took the Chitu mounting plate, removed the cradle for that remote and added an angled upright with holes for M3 screws. I made the back of the control cradle a little thicker to allow for recessing the M3 screws that attach the cradle…
This mounts to the elegoo centauri carbon at the case fan exhaust area and allows high flow to a 4" ducting connection. Printed in petg with 4 walls. Mounting flange is delicate, but works. Supports organic, on build plate only.
Works well without restricting airflow or using a lot of filament. Prints as-is without needing additional supports. Made using PETG @ 250c with 2 perimeters/top and bottom layers, 0,25mm layer height, 0,6mm extrusion width, 15% infill.…
Having printed and attached the mount for the Sunlu S1 dryer I've found I haven't needed it as much. I didn't want to keep removing it. So this is set of rollers that drop into the bottom of the mount. It allows you to leave the mount…
This bracket is designed to attach a dial indicator with 8mm stem to the toohead, allowing for manual leveling of the bed. It requires a couple of M3 screws for assembly. The clamp is held to the base by two M3×8×⌀5 threaded inserts, the…
I tweaked the original model Elegoo Centauri Carbon Multiboard side panel [Mod] by Skrattoune Why the Changes? I have my Filament Sensor and Spool Holder on the right side of my Centauri Carbon. I didn't want the plate to stick past the…
