Centauri Carbon Internal 1kg Spool Mount Kit
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount 1kg Spools of filament in an Elegoo Centauri Carbon
- Rating
- 4.5 / 5
- Likes
- 182
- Downloads
- 1,068
- Makes
- 3
- Views
- 7,672
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Mount up to 6.5 cm wide 1 kg spools inside your Centauri Carbon. Print two each of the 5 mm vertical and horizontal spacers for the right-hand wall. You may fit the spool without removing the studs but that will require that the bed is moved out of the way to remove the spool/holder. The studs may be removed with a little effort. You will also need to have at least 8x 12mm M3 screws available to install the spacers.
- Saves space - four printers to a 7 ft shelf instead of 3
- Keeps hygroscopic filament dry while printing
- Pair with my Elegoo Centauri Carbon Side Panel Hinge Kit
- Improved spool holder: Elegoo Centauri Carbon Internal Spool Holder Gen2
- Deeper spacers available: Centauri Carbon 7.5 mm Panel Spacer
I recommend printing these in ASA or PETG with 4 walls and 3D honeycomb infill at 8-10%.
See Uncle Jessy test the initial release of this recently improved kit here: