Centauri Carbon Internal 1kg Spool Mount Kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount 1kg Spools of filament in an Elegoo Centauri Carbon
- Ocena
- 4,5 / 5
- Polubienia
- 182
- Pobrania
- 1068
- Wydruki
- 3
- Wyświetlenia
- 7672
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Mount up to 6.5 cm wide 1 kg spools inside your Centauri Carbon. Print two each of the 5 mm vertical and horizontal spacers for the right-hand wall. You may fit the spool without removing the studs but that will require that the bed is moved out of the way to remove the spool/holder. The studs may be removed with a little effort. You will also need to have at least 8x 12mm M3 screws available to install the spacers.
- Saves space - four printers to a 7 ft shelf instead of 3
- Keeps hygroscopic filament dry while printing
- Pair with my Elegoo Centauri Carbon Side Panel Hinge Kit
- Improved spool holder: Elegoo Centauri Carbon Internal Spool Holder Gen2
- Deeper spacers available: Centauri Carbon 7.5 mm Panel Spacer
I recommend printing these in ASA or PETG with 4 walls and 3D honeycomb infill at 8-10%.
See Uncle Jessy test the initial release of this recently improved kit here: