Elegoo Centauri Carbon Detector mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Elegoo Centauri Carbon Batch 2 styled filament detector mount.
- Rating
- 4.889 / 5
- Likes
- 453
- Downloads
- 2,993
- Makes
- 25
- Views
- 12,477
- Reviews
- 27
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Batch 2 styled filament detector mount. It can freely rotate around the pivot and shift the filament line by 28.5mm. Parts have 1 layer sacrificial bridge layer to make it easy to print.
For Batch 3 I modified the base. Enjoy it!
Any feedbacks are welcomed!
You will need:
- x2 M3 8mm screws
- x2 crews from detector
- x2 M3 nuts OR x2 M3S heat inserts for Batch 1&2 only
Print settings:
- 0.16mm layer height
- 4 wall
- 20% infill
- no support
for Batch3:
- support Enabled
Assembly:
- Insert x2 M3 nuts OR M3S into Part3
- Insert part1 in part2. Screw part2 to Filament Detector
- Insert Part2 in Part3. Turn Part2 90 degree to fit in. Screw Part3 to the side panel with x2 M3x8mm screws.