Elegoo Centauri Carbon antivibration feet UPDATED!
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
True antivibration feet for Elegoo CC. Specifically designed to act as dampening springs.
- Rating
- 4.85 / 5
- Likes
- 625
- Downloads
- 3,709
- Makes
- 42
- Views
- 17,720
- Reviews
- 40
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
NEW UPDATE: Behold an improved and raised version!
- I extended the bellow section to add one more to prevent bottoming out during Ludicrous mode prints
- Added more thickness to the adapter interface for more high frequency vibration damping
- Added a lip into feet and a recess inside the adapter so that no more glue is needed! just apply a lot of force and the TPU part will snap into place which makes it removable and swappable for a different color one or (future update: a different design of the TPU part)
IF YOU WANT MORE DAMPING; OR LESS STIFF FEET; PLEASE USE SOFTER TPU
Hi all CC users, this will revolutionize the wibbly-wobblies. The anti-vibration feet (real anti-vibration feet aka dampers) are to be printed in two pieces, print adapter piece preferably in PETG, PLA is also good, 3 walls and infill at will, orient them so that flat surface touches the bed and use tree supports. TPU dampening part aka spring shall be printed in 95-98A TPU (print softer at your own risk, haven't tried) 3 walls, orient in a way to avoid supports aka flat part at the bed. Glue two pieces with CA clue together and attach under your machine(s).
Leave a comment and a make to help me grow. Thanks :-).
UPDATE:Center holes were added to both models so that original feet screws can be accessed.