Elegoo Centauri Carbon antivibration feet UPDATED!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
True antivibration feet for Elegoo CC. Specifically designed to act as dampening springs.
- Ocena
- 4,85 / 5
- Polubienia
- 625
- Pobrania
- 3709
- Wydruki
- 42
- Wyświetlenia
- 17 720
- Oceny
- 40
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
NEW UPDATE: Behold an improved and raised version!
- I extended the bellow section to add one more to prevent bottoming out during Ludicrous mode prints
- Added more thickness to the adapter interface for more high frequency vibration damping
- Added a lip into feet and a recess inside the adapter so that no more glue is needed! just apply a lot of force and the TPU part will snap into place which makes it removable and swappable for a different color one or (future update: a different design of the TPU part)
IF YOU WANT MORE DAMPING; OR LESS STIFF FEET; PLEASE USE SOFTER TPU
Hi all CC users, this will revolutionize the wibbly-wobblies. The anti-vibration feet (real anti-vibration feet aka dampers) are to be printed in two pieces, print adapter piece preferably in PETG, PLA is also good, 3 walls and infill at will, orient them so that flat surface touches the bed and use tree supports. TPU dampening part aka spring shall be printed in 95-98A TPU (print softer at your own risk, haven't tried) 3 walls, orient in a way to avoid supports aka flat part at the bed. Glue two pieces with CA clue together and attach under your machine(s).
Leave a comment and a make to help me grow. Thanks :-).
UPDATE:Center holes were added to both models so that original feet screws can be accessed.