Anycubic Kobra S1 Fan duct (almost 360°) for upgraded hotends with ceramic heater (not for stock)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Optimized Anycubic Kobra S1 Fan duct (almost 360° air flow) for hotends with ceramic heater
- Rating
- 3 / 5
- Likes
- 107
- Downloads
- 716
- Makes
- 2
- Views
- 3,326
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Standard Digital File License
Was looking for a good fan duct with 360° cooling and good nozzle visibility of Kobra S1 and decided to make this one for upgraded hotends (with ceramic heater).
The model is easy to print with or without supports (up to you). Please print with at least PETG or any other heat resistant material. This one is printed with PETG and works perfectly.
Installation/deinstallation is simple and easy just please do not rush. Firstly fit the bottom part and then slowly install the cover on its place. To remove the cover - in reverse order. First, unclip the top part, and then carefully remove the entire cover with a top-down movement.
- model does not collide with the heatbreak fan or any other part of the printer
- easy print without supports
- better angle to cool the printing model
- weight is only 15 grams (PETG)
Process:
- 2 walls
- 2 top shells
- 2 bottom shells
- 10% infill
- outer wall speed - 60-80
- bridge speed - 50
- ironing - All top surfaces
- wall generator - Classic
Will be looking forward for your recommendations and ideas how to improve the model.