1 / 4
Anycubic Kobra S1 Fan duct (almost 360°) for upgraded hotends with ceramic heater (not for stock) — zdjęcie 1
1 / 4

Anycubic Kobra S1 Fan duct (almost 360°) for upgraded hotends with ceramic heater (not for stock)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Optimized Anycubic Kobra S1 Fan duct (almost 360° air flow) for hotends with ceramic heater

Ocena
3 / 5
Polubienia
106
Pobrania
711
Wydruki
2
Wyświetlenia
3303
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Standard Digital File License

Was looking for a good fan duct with 360° cooling and good nozzle visibility of Kobra S1 and decided to make this one for upgraded hotends (with ceramic heater).

 

The model is easy to print with or without supports (up to you). Please print with at least PETG or any other heat resistant material. This one is printed with PETG and works perfectly.

 

Installation/deinstallation is simple and easy just please do not rush. Firstly fit the bottom part and then slowly install the cover on its place. To remove the cover - in reverse order. First, unclip the top part, and then carefully remove the entire cover with a top-down movement.

 

  • model does not collide with the heatbreak fan or any other part of the printer
  • easy print without supports
  • better angle to cool the printing model
  • weight is only 15 grams (PETG)

 

Process:

  • 2 walls
  • 2 top shells
  • 2 bottom shells
  • 10% infill
  • outer wall speed - 60-80
  • bridge speed - 50
  • ironing - All top surfaces
  • wall generator - Classic

 

Will be looking forward for your recommendations and ideas how to improve the model.

Tagi