1 / 18
Snapmaker J1 or J1S tophat printable remix with Chamber Heater — image 1
1 / 18

Snapmaker J1 or J1S tophat printable remix with Chamber Heater

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a printable remix of Mr Edgett's tophat. This one uses printable side pieces and a chamber heater

Rating
5 / 5
Likes
20
Downloads
189
Makes
1
Views
1,524
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution

Printable side panels and corners.  Use M4x12 screws with inserts.  The holes on the corners are good enough that you don't need inserts.  You can use nuts and M4 bolts to attach the panels together.  You need 6 short panels,2 long panels, 4 corners as well as the Rear middle to make a full set with the fan.  Or, If you don't want the shroud, You need 4 short panels, 4 long panels and 4 corners.    Use the Magnets as per the original top-hat design and use the factory aluminum cover.  

Update 1:  Added additional diagonal stiffeners to all panels for rigidity.

Update 2:.  Modified Rear middle piece, added Captured M4 nuts to assist in assembly.  

Update 3:  Added Chamber heater and many additional panels and pieces

Tags