Snapmaker J1 or J1S tophat printable remix with Chamber Heater
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a printable remix of Mr Edgett's tophat. This one uses printable side pieces and a chamber heater
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 189
- Wydruki
- 1
- Wyświetlenia
- 1524
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Printable side panels and corners. Use M4x12 screws with inserts. The holes on the corners are good enough that you don't need inserts. You can use nuts and M4 bolts to attach the panels together. You need 6 short panels,2 long panels, 4 corners as well as the Rear middle to make a full set with the fan. Or, If you don't want the shroud, You need 4 short panels, 4 long panels and 4 corners. Use the Magnets as per the original top-hat design and use the factory aluminum cover.
Update 1: Added additional diagonal stiffeners to all panels for rigidity.
Update 2:. Modified Rear middle piece, added Captured M4 nuts to assist in assembly.
Update 3: Added Chamber heater and many additional panels and pieces