P
Printables
Linear Rail Guide Adapter For Quick Swap Kit - Snapmaker 2.0 A350
I was looking for a solution to use the linear rails SBR16 with the quick swap kit and it was also necessary that we can quickly remove the adapters.
Search results: snapmaker
Counting matching models…
P
Printables
Mount for Snapmaker Artisan controller
This is a mount for my Snapmaker Artisan controller to raise it up and tilt it at an angle to make it easier to use. It is in two parts; the top attaches to the bottom by removing the two M3 screws and replacing them with longer ones, and…
P
Printables
Snapmaker 2.0 Enclosure Filament Holder Adapter
Snapmaker 2.0 Enclosure Filament Holder Adapter Function: This adapter relocates the filament spool holder on the Snapmaker 2.0 enclosure from the long side to the narrow rear side, addressing space constraints and accessibility issues.…
P
Printables
Snapmaker J1 Halter für - holder for Duet 3 6HC
----for english, please scroll down---- --- moved from MyMiniFactory --- Halter, um einen Duet 3 6HC-Controller in einen Snapmaker J1 einzubauen. Die Duet wird über Luftkanäle mit einem 5015-Radiallüfter von unten gekühlt. Hierzu muß…
P
Printables
Snapmaker U1 - PTFE Adaptor for Autofeeder - minimal print time
Why and what for This will allow you to connect 4mm OD (standard size) PTFE Tubing to Autofeeders of Snapmaker U1. You can customize all the colors. Discussion topic -…
P
Printables
Snapmaker U1 - Top Corner Stand
These are stands that connect to the Top of Snapmaker U1, 4 stands create a base that you can put a low cost Top Cover over it. Feel free to adjust it to match your need. There are 2 files: 1 with 1 stand only. Another is 4x stands for 4…
P
Printables
Snapmaker U1 Filament Adapter
German: #Beschreibung Ein Spulenadapter für die Alten Sunlu V1 Spulen auf dem Snapmaker U1. Der Innenring kann aus TPU gedruckt werden um die “Hemmung” auf dem Adapter zu erhöhen und ein herunterfallen zu verringern. Das Modell wurde auf…
P
Printables
Top Cover for Snapmaker U1
The main goal of the project is to create the best possible thermal and acoustic insulation. I understand that it's cheaper to install an ugly IKEA box, but it's more of an ugly decoration than a real cover. The goal was achieved. The…
P
Printables
Snapmaker U1 Direct Feed Multi Spool Holder
1–4 spool holder system for the Snapmaker U1 direct feed inputs, with optional low-friction rollers. TPU tested down to 70A, including multicolor / multishore prints. Description While testing soft TPU on the Snapmaker U1, I developed…
P
Printables
Snapmaker U1 Top Cover Modding for IKEA SAMLA 45L
Reupload of Beaver Works 's great work that he uploaded to MakerWorld The official Snapmaker top cover costs a whopping $249 ... and my wallet simply did not approve of that purchase. So, I had to take matters into my own hands and create…
P
Printables
Snapmaker U1 Touchscreen Tilt Mount
Introduction Quite a few people keep their Snapmaker U1 close to the floor which makes the touchscreen a bit harder to see and use. This mount allows tilting the touchscreen upwards for better visibility and usability. This is not an…
P
Printables
Bento Box Air Filter for Snapmaker U1
The ridge should hook fairly firmly, but I still taped it to the back just in case. Please use the cover, hepa, and fan case from the original model.
P
Printables
Snapmaker U1 Tool Holder for my Top Cover Adapter
This is a tool holder for the Snapmaker U1. It is made for the set of tools that came with the printer. The tools are easy accessible and don't interfere with the spool holders. The tool holder attaches to my top cover adapter which has…
P
Printables
Snapmaker U1 tool tray - no supports - remix
Basic tool tray for most of the tools that came with the Snapmaker U1 printer. As per the original model by Gur (which the model I remixed is a remix of), use the screws that were holding the buildplate down to attach this to the holes at…
P
Printables
Snapmaker U1 - P1S hotend modification
First off: I do NOT advise trying this unless A) you are fairly mechanically inclined/crafty, and B) are ok with potentially boat anchoring your shiny fresh new U1 with no parts availability yet lol parts are available now but still…
P
Printables
Base snapmaker U1
Ho creato una base con cassetti per la mia Snapmaker U1,io ho usato la versione senza cassetti laterali è molto solida ma ha avuto bisogno di molto filamento, cosi per risparmiare filamento ho deciso di includere nel progetto altri due…
P
Printables
Snapmaker U1 - Driver Heatsink Mod
I decided to create this mod after noticing how sharply the driver temps changed up and down, this led to me tearing my U1 down to investigate. What I found, was that the stock heatsink was placed on the topside of the driver chips.…
P
Printables
Snapmaker U1 Tapo C120 camera mount
Made a mount for Tapo C120 camera for the Snapmaker U1. Printed with PLA and fits nice. Ignore the terrible camera screenshot because I didn't adjust the camera focus yet. I ended up printing it the same way in the 3mf file and added…
P
Printables
Snapmaker U1 Easy Spool Holder
The original spool holders are a bit difficult to take a lot of spools on and off. I think they did it that way so RFID spools would stay nice and close to the reader, but if you are like me and not using that much Snapmaker filament so…
P
Printables
Snapmaker U1 Sound Barrier
This is not an enclosed top mod. I have no plans of printing high temp materials on my Snapmaker U1 but I did want to cut down the noise level since the heads/fans are right at the top and can be quite loud. My solution was a modular…
P
Printables
Snapmaker lid for 5x4 Gridfinity Rugged Case "Light" R3
It is remix of Snapmaker lid for 5x4 Gridfinity Rugged Case created by wildtang3nt. The only change I made was rotating the logo by 180 degrees to have it facing your way when you open the case. Link to original lid with Snapmaker logo:…
P
Printables
Bambu Lab Feet Adapter for Snapmaker U1
The original feet on the U1 are "not the best" and I had an additional pair of anti-vibration feet from my P1 laying around, so I came up with this small adapter to use them on my U1.
P
Printables
Snapmaker U1 Tool Holder
Tool Holder for Snapmaker U1 NO SUPPORTS needed. Single screw fixation, Handle position of scraper and brush are optimized for quickly Nozzle needle container sits underneath the scrapper. Plier is held in closed position to minimize risk…
P
Printables
Snapmaker 2.0 removable holder for linear rails SBR16 for y-axis stabilization
Installed linear rails to get rid of flexing of the workplate of my Snapmaker 2.0. The rail holders screw into the base of the linear modules, allowing an installation without drilling the base. This model is a re-design/remix to fit…
P
Printables
Snapmaker U1 Interior Grille Covers
8/15/26 Update: I've since learned that the grille on the bottom isn't for cooling any electronics—It's just a hole that goes through the bottom of the machine for no apparent reason. Added a solid cover print profile to help retain heat…
P
Printables
Top Surface Ironing Test - for Snapmaker U1
Modified Orca Slicer settings for Snapmaker U1 printed with eSun PLA+ and PETG
P
Printables
Snapmaker U1 6mm PTFE Removal Tool
Tool to make removing the PTFE tubes on the Snapmaker U1 (or any printer with 6mm PTFE tubes) easier.
P
Printables
Skadis 4x Hotend holder for Snapmaker U1
I Remixed the 4x Hotend Holder for attaching them to Ikea Skadis
P
Printables
Snapmaker U1 Spool Holder for dry box
This model tries to immitate the original Snapmaker U1 spool holders. It is ment to be used in conjunction with the U1 side dry box made by 三文 (@sevenxiaoyu) and published at…
P
Printables
Snapmaker U1 tool holder
I recently got a Snapmaker U1 and wasn't satisfied with any of the tool holders out there. I tried the one that goes inside but found it annoying to have to open the door every time I needed my tools. I decided to use a hole on the top of…
P
Printables
Snapmaker U1 spool holder snap-fit connector
An alternative snap-fit connector to the one used in spool holder SnapMaker U1 by cavecchia.andrea77 *This is only the connector that fits in the mounting holes of the Snapmaker U1 and requires the rest of the components located here:…
P
Printables
Snapmaker U1 Thumbscrew Dial
The stock bed‑leveling knobs on the Snapmaker U1 can be stiff and difficult to turn during manual leveling. To make the process smoother and more comfortable, I designed a simple grip‑enhancing tool that fits over the existing knobs and…
P
Printables
Snapmaker U1 door hinge. External hinge 180degrees
The snapmaker U1 door opens to the left and 90° only. This external print in place hinge helps to open 180° or to right side. See the pictures Use strong double sided mounting tape. Wipe with Acetone and Isopropanol (in that order!) to…
P
Printables
Refillable Spool for ELEGOO refills - Snapmaker U1 and Bambu Compatible
Tested on the Snapmaker U1, should work on the BambuLab A1/mini AMS units too.
P
Printables
Snapmaker U1 top cover
Here is my design for the SNAPMAKER U1 top cover. It was created so that it could be printed on this printer. Some elements require supports (top element), others theoretically do not, but for stability I had to add them anyway. The cover…
P
Printables
Snapmaker U1 Samla Spare Spool Holder
If you removed the Snapmaker U1's spool holders and want to keep them neatly stored on the edge of the Samla 45L tophat. Works with any Samla Tophat mod that leaves the lip opening exposed. This is design is intended for storing…
P
Printables
Top cover for Snapmaker U1 using 60L Box One from Action
We all know the IKEA SAMLA top covers for Snapmaker U1. I didn't want to drive to the nearest IKEA so instead I went to ACTION and picked up a larger 60L storage box (link) and spent way longer designing this adapter than the IKEA trip…
P
Printables
Snapmaker U1 Feeder Relocation To Rear Position
UPDATE: I have replaced the profiles with ones containing four build plates. The following versions are included: V1.0 - classic version with feeder holders that fit snugly to the housing curves, PC4-M6 V1.1 - classic version with feeder…
P
Printables
Snapmaker U1 wire shelf filament feeder relocation
This model is designed to help relocate your Snapmaker U1's filament feeders to the position of your choosing. My bracket is designed to clip onto wire shelving with 30mm on-center spacing (3mm rails), but can be easily customized in your…
P
Printables
Snapmaker U1 Spool holder with bearings
And another spoolholder for the snapmaker U1. It is a complete makeover of an existing one at maker world. You'll find two different sizes. The short one holds spools up to 66mm width, the long one up to 88mm. You'll need 2 bearings 608…
P
Printables
Snapmaker Artisan Repeatable Origin Fixture (Work In Progress)
IMPORTANT: This thing is not yet fully ready for use. I do not recommend printing this yet. I haven’t even printed it yet. There is a bunch of development and testing I need to do first. This is based off of some ideas from…
P
Printables
Table for Snapmaker Artisan
The Snapmaker Artisan is a HUGE machine and I recall finding a table to support it was a huge challenge. I made this design a couple of years ago and it continues to hold up great. I wanted to share it for others. It just uses 2x4s and…
P
Printables
Snapmaker Artisan GoPro Camera Mount (Best for Timelapse Captures)
Remix of https://www.thingiverse.com/thing:6401198 The beauty of this mount (as well as the original design) is that it mounts to the bed, keeping the print itself in a static frame of reference so you can actually get stable timelapse…
P
Printables
Rubbermaid 21-Cup Mount for Snapmaker Artisan
This is a mount for Rubbermaid 21-cup containers. These are often used for creating DIY filament dry boxes and there are several designs for them on Thingiverse. The one I use is a modified version of this one:…
P
Printables
Improved Snapmaker U1 front and rear trays
I initially printed a front and rear tray from other users on here and whilst very good, I felt a few features could do with improvement, so these are all inspired by the great work of many others but rebuilt from the ground up. My…
P
Printables
Snapmaker U1 NFC / RFID Tag Holder
With Paxx12's extended firmware for Snapmaker U1 , you can use custom RFID tags for your filament and the U1 will automatically recognize the properties for each tool head. This works great when you put the spool with the tag on the spool…
P
Printables
HSW Snapmaker U1 build plate holder Honeycomb storage wall
Honeycomb storage wall Snapmaker U1 build plate holder. Only support needed for the high knob.
P
Printables
Door Handle - Snapmaker U1
A larger, beefier door handle for the Snapmaker U1. Use existing hardware. a 10x3 magnet can be added to the back and lines up with my Lefty Door Mod . 10x3 magnet -…
P
Printables
Snapmaker U1 IKEALLER top cover
IKEALLER cover (v2.3) Snapmaker U1 enclosure by @AMelo BEST Snapmaker U1 enclosure design. Similar filament usage, printing time and hardware cost of IKEA bulky adaptor solution BUT with much more functionalities and style. Designed to…
P
Printables
Snapmaker U1 Angle piece.
You can use this to place the feeder on the right side to connect it to a dryer
P
Printables
Snapmaker U1 side feeding motors cover
Remix of great motor cover - i made it thinner and without a cable compartment.
P
Printables
Gridfinity 4x5 rugged case - Snapmaker Edition
I really like the parametric Gridfinity Storage box by Pred, but I don't need the stackable design. And I even like the look of the rugged box by Whity more. So I combined both of them in a 4x5 Gridfinity box. This edition contains two…
P
Printables
Snapmaker U1 PTFE Adapter
Bowden Collet und Clip, 4MM Collet Extruder Plug Parts used: Amazon AliExpress
P
Printables
Snapmaker U1 Cover with Door & Recycling fan
***Note*** You can print the fan system parts, and as soon as my fan gets in, i will make an installation video Hi gang :) Made this full cover with the front door to help keep our temperature inside and also to have full access from the…
P
Printables
Snapmaker U1 Door Gap Remover
The Snapmaker U1 has a massive gap between the door and the chassis. This gap remover should help retain more heat inside and also reduce the noise coming from the machine with the door closed. Instructions Print in TPU. I used 95a. Print…
P
Printables
Snapmaker U1 sidepanel DRYERS KIT
Snapmaker U1 Full side Dryers system Hi gang :) So here is my crazy invention/addons for a pair of dryers to keep filaments under dry control and to help also cooling down the drivers and PSU as modification to the existing intake ports…
P
Printables
Seal for the base of the Ikealler Snapmaker U1 cover
Seal for the base of the Ikealler Snapmaker U1 cover Print in TPU
P
Printables
Snapmaker Orca Full Spectrum Test Objects
Full Spectrum is a fork of the Snapmaker Orca slicer. It includes support for virtual mixed-color filaments designed for the Snapmaker U1 multi-color printer with independent print heads. https://github.com/ratdoux/OrcaSlicer-FullSpectrum…
P
Printables
Portabobinas Snapmaker U1 Ikea Pax
Este diseño te permite reutilizar los portabobinas originales de Snapmaker anclándolos directamente a los laterales de un armario IKEA PAX . Al sacar las bobinas de la estructura de la impresora, consigues un espacio de trabajo más limpio…
P
Printables
Halterung für Chitu-Mini-Heater-H2 im Snapmaker U1
Diese praktische Halterung wurde speziell für die sichere und optimale Positionierung eines Chitu Mini Heater H2 im Snapmaker U1 entworfen. Sie ermöglicht eine stabile Befestigung und sorgt gleichzeitig für eine gezielte Luftführung…
P
Printables
IKEALLER toolbox for Snapmaker U1 by @amelo
IKEALLER toolbox Very professional looking toolbox for U1 that includes snapmaker logo ! Great design matches the U1 when printed with this light grey and black lining . It keeps you most used tools at hand! 26.may.26 update includes OPEN…
P
Printables
Panda Breath Cable Gland for Snapmaker U1
I didn't like the cable routing for the Panda Breath on my Snapmaker U1 so took the plunge and decided to drill a hole in the back window. Easily plugged if necessary. Use the drill guide (with the flat edge against the bottom outside…
P
Printables
Snapmaker U1, cover for external fan for X,Y stepper driver
i made cover for external fan for X,Y stepper driver for snapmaker U1, thaht allow instal noctua 40x40x10 mm 5V fan from noctua without printer diesasembling. Fan is powered from USB port of U1. Fan is blowing air to inseide U1. Printed…
P
Printables
Snapmaker U1 Purge Sorter
I was tired of my PETG mixing together with PLA with no proper way of telling which apart. Which led me to model a splitter to ease my suffering of not being able to recycle into new spools. May conflict with Panda Breath Heater, I'll try…
P
Printables
Snapmaker U1 90 degree perch for Autofeeder
Yellow boxes in the .3mf are modifiers to ensure the hooks are printed solid.
P
Printables
Snapmaker U1 Bed Scraper
Onshape design link: https://cad.onshape.com/documents/7a18dc97c1fd44bf1453750e/w/434428d8f582cec4f55f5570/e/0894672750969afab744cd6c?renderMode=0&uiState=69c63f9d2253924c1a19ac07
P
Printables
Snapmaker U1 1x6 GridFinity back storage
Snapmaker U1 gridfinity storage, make it possible to use the back inside the printer to store up to 1x6 gridfinity boxes. Perfect for hotends and other spare parts for Snapmaker U1.
P
Printables
Snapmaker U1 Top-load Easy Spool Holder
I have my U1 in a tight space and wanted a solution to avoid having to drag my printer to the sides to make room whenever I needed to load spools. RFID tags still work. I recommend PETG. REMOVAL INSTRUCTIONS: you need to rotate the…
P
Printables
Snapmaker U1 Sillhouette - Wallart
Deutsch: Ein Wandgemälde im Snapmaker U1 Style. Der Druck sollte in Weiß stattfinden auf Dunklem Hintergrund. Natürlich kann der Druck auch angemalt werden um etwas mehr Flair zu geben English: A Wall Art from the Snapmaker U1 Print it in…
P
Printables
Snapmaker U1-Tooltray & Poopbox
I've designed this Box to stay in front of the printbed, holding the most needed tools and collecting the small plastic pieces ;) The printbed can move up and down without contact and the recyclebin can be emptied easily. If You like the…
P
Printables
Spool Holder Snapmaker U1 with 608 Bearings Super Smooth
Filament spool holder for the Snapmaker U1 printer. The design is based on a cylindrical structure with two standard 608 / 608Z bearings. It allows the spool to rotate very smoothly and freely, while also supporting all spool sizes,…
P
Printables
SOLVED w/ Vented and Hygrometer options! Snapmaker U1 Side Filament Cover + Desiccant System (Airtight Dry Box Upgrade) Simple Build!
UPDATED: The Vented Version is considered the current version and can be used for vented or non vented but it's a little easier to assemble. The reversed thread knob is for for the right side of the non vented files so you probably will…
P
Printables
Snapmaker Brush Cover
Simple cover to protect the Snapmaker U1 brush (or either your hands :D )
P
Printables
Snapmaker U1 Improved PSU and Motherboard Cooling - with CAD-Files
Fan Duct for the PSU and the Mainboard of a Snapmaker U1 to improve the cooling and isolate the cold air flow from the chamber. I also publish my CAD (FreeCAD) and STEP files for further remixing Printed with ABS for heat resistance.…
P
Printables
snapmaker u1 tools handle for honeycomb side panel
I made mounts for the side panels to hold tools for the Snapmaker U1 printer.
P
Printables
Oversized Filament Spool Retainer Adapter for Snapmaker U1, AMS Lite, or similar
Two versions... one that I tested and it worked fine, and another that should fit a little more tight on the stock spool holder grips. Print in either PETG or PLA.. whatever works best for you.
P
Printables
Snapmaker U1 Minimalistic Sterilite Lid Top Holder
Description These Corner Alignment Guides are designed to keep a Sterilite 58‑Qt bin lid more secure when used on the Snapmaker U1. This setup is meant to reduce overall noise while still allowing airflow around the machine. This design…
P
Printables
Snapmaker U1 72mm spool adapter
I had some old spools of filament and they had much larger diameter holes which don't work well on the U1 spool holders. So I made this. I added the Fusion file if someone wants to mess with the sizes. Sorry if it's quick and crude, but…
P
Printables
Spoolholder for Snapmaker U1 (no snap-in)
You also installed the original spoolholders and then found out they are "not good"? Then you also struggled even more to remove them again, fearing to break the whole sidepanel of the printer? You searched for alternatives, but they all…
P
Printables
Universal Printer (and Snapmaker U1) Gridfinity Drawer System (Stackable, No Supports) N-Spire
UPDATE: I have gotten some feedback that people want a plate rack included. I like the idea, if you are interested please mention it in the comments and if ya'll really want it, I'll get to work on it and include the files. Printers under…
P
Printables
Snapmaker U1 Samla Gridfinity Baseplate Top
I wanted to use the space on top of the IKEA Samla bin that's living on top of my Snapmaker U1 ( see here for the mount ). So like any good 3D printer owner, I slapped some gridfinity on it. This gives you a 8x12 gridfinity baseplate that…
P
Printables
Snapmaker U1 Tool Tray - New! Design with Extra Storage, Easier Access, Flush
This tool tray mounts directly in the front of the Snapmaker U1 using the shipping screws. It holds the scraper, snips, cleaning brush, hex keys, spare spring, spare screw bags, and has two extra storage areas. Fits flush to the front of…
P
Printables
Snapmaker U1 40x20mm fan mount for x,y driver cooling - clip-on
Holds a 40x40x20mm 5vdc fan between spools 3 and 4 of the Snapmaker U1. Clips into the existing vent holes so no need to disassemble or modify the case or use tape. Remix of Full_covered_40mm_fan_cover_aimpoint.stl by pakkko/Dennis Romje.…
P
Printables
Snapmaker U1 Top Cover with locking Flap and LEDs Remix
First of all, a big thank you to ShelbyCob for the excellently designed top cover. This top cover is my favorite of all, the front flap locks into two positions, and the fit to the printer is perfect. With other top covers, you have to…
P
Printables
Snapmaker U1 Toolhead holders
Here are some simple and handy toolhead holders for those of us who swap out the toolhead to change exextruder diameters of our extruders. There are two types: One for toolhead #1 (leftmost) and another for the other three, #2-#4. You can…
P
Printables
Snapmaker u1 top cover 60L box (59cm x 42cm x 36cm)
Top cover for the Snapmaker U1 3D printer. A 60L container (59cm x 42cm x 36cm) is used. Printed with a layer height of 0.2 and a line width of 0.65 , infill density of 10% with a Gyroid infill pattern. Total weight is approximately 320g…
P
Printables
Snapmaker U1 door handle
This is based on a file on another site, I don't know the original maker. I printed the original and it did not allow my door to close all the way. I modified that file to allow the door to close.
P
Printables
SnapMaker U1 Tub Top, Costco Special
As I am printing the Ikealla top, I printed a temporary support for the readily available tub (Costco special) to help retain heat while printing PETG. This tub is more shallow than the typical ones used for these top tub mods, so I…
P
Printables
Snapmaker U1 build plate holder - Remix with stabilizing feet
This remix adds stabilizing feet to the build plate holder. There is both a version of the three plate holder with feet and just the foot alone (if you already printed the holder).
P
Printables
Panda Breath HEPA filter latch for Snapmaker U1
This simple HEPA filter bracket replacement for the Panda Breath heater lets you swap out the HEPA filter from the front without removing the heater from the U1. The normal method of swapping the filter out the top of the Panda Breath is…
P
Printables
Snapmaker U1 Screen mod remixed
I have my two Snapmaker U1 printers on a very low table. I could not read or use the screens as they were shipped because of the angle. I tried every mod that I could find and none worked as well as I wanted. I took two and combined them.…
P
Printables
Snapmaker 1600mw Laser Tool Head Case
This is a simple box to store the 1600mw Snapmaker laser module toolhead in when not in use. It keeps it protected and free of dust and prevents the lens protector or camera being scratched or knocked. I use this so I can just store it in…
P
Printables
Snapmaker J1 Recirculating Activated Carbon Air Filter Purifier
This air filter with activated carbon pellets helps to reduce the fumes/smells from printing ABS or ASA by recirculating the air inside the printer. This also helps to create a more even temperature throughout the build chamber. Make sure…
P
Printables
USB Extender for Snapmaker 2.0
I just needed to attach my USB extender to the top of the Snapmaker. Works perfectly. Print Settings Printer Brand: Snapmaker Printer: Snapmaker 2 A350 Rafts: No Supports: No Resolution: .24 Infill: 15 Filament: Inland PLA+ Black…
P
Printables
SnapMaker 2 Enclosure Door Mount
I wanted a controller mound that would make the controller more accessible to the side doors while also plugging the hole in the front door. Its sized to use the same screws that mount the stock holder. Added v5, which decreased the size…
P
Printables
Snapmaker J1 IR camera mount
Camera used: OV5647 175° Night Vision 5MP Automatic IR-CUT https://www.aliexpress.com/item/1005006051584962.html
P
Printables
Snapmaker A250 QS Corner
All the other alignment tools I found mounted either in the center or otherwise and lost a lot of space. So I modeled this one up to take up the least amount of space and quickly removeable if needed. I may swap the pins out for M4 screws…
P
Printables
Snapmaker A350 Laser Square
Decided to move away from my old remixed corners to design my own that expands out further and is more reliable in placement. I made the tolerances fairly tight so it doesn't move, so you may have to tweak your printer to get it to fit.…
P
Printables
3D Chameleon Adoptation for Snapmaker 2.0 Single Extruder
What & Why This is a project to adopt 3DChameleon to Snapmaker printers to allow multicolor/material prints on a single extruder or potentially with community help print 8 colors on dual extruder. Print settings Material - PETG/ASA/ABS.…