Ultimate Snapmaker U1 Filament Enclosure, Cover and Case (~1.2kg) - Updated Version V2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Design updated to include a dedicated desiccant compartment and tangential filament routing to minimise bending stress.
- Rating
- 4.333 / 5
- Likes
- 95
- Downloads
- 424
- Makes
- 3
- Views
- 3,378
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Update 01/10/26
Increased cutout for the bases by 1 mm.
Update 04/09/26
Added 3mf print file
Adjusted left and right base sensor cutouts.
Update 30/08/26 - New revision added, the following has been added.
Desiccant storage system has been redesigned, 1 container with at least 120g of capacity.
The top cover has now been modified as one component, no cutout.
Top cover now includes a mounting system for the desiccant system.
The bottom cover now has the sensor cutout integrated into it.
Update 02/05/26
Modified the auto feeder PTFE connectors. It now fits better within the metal spacer hole.
Bottom Half Right 1 and 2 are the base covers for the right, you can slice one and print twice. The same goes for the Bottom Half Left. Also, you need to print the desiccant plate twice for four sets.
(Use the attached print profile, I have fine-tuned this over multiple prints). If not, note the following:
To print the base covers, please rotate either base such that the joint between two adhesive groove points towards the front end of your build plate, this will align the cutout of the sensor roughly towards a corner of your build plate.
Due to variation in filament types, it is advisable to print the base at 99.95%.
Thanks for downloading! Please provide feedback for improvements.
If you appreciate this model, you can buy me filaments here: https://ko-fi.com/emam719431
I am also selling the full part list (3D printed parts and accessories) required for the complete build on my website, Etsy and eBay with international shipping.