Counting matching models…
The original spool holders are a bit difficult to take a lot of spools on and off. I think they did it that way so RFID spools would stay nice and close to the reader, but if you are like me and not using that much Snapmaker filament so…
I've designed this Box to stay in front of the printbed, holding the most needed tools and collecting the small plastic pieces ;) The printbed can move up and down without contact and the recyclebin can be emptied easily. If You like the…
This remix is intended as a clearance test for physical and virtual filaments using FullSpectrum with the Snapmaker U1. However, this model can be used with other multiple toolheads or filament carriers, as well as single/dual nozzles…
I wanted to use the space on top of the IKEA Samla bin that's living on top of my Snapmaker U1 ( see here for the mount ). So like any good 3D printer owner, I slapped some gridfinity on it. This gives you a 8x12 gridfinity baseplate that…
The snapmaker U1 door opens to the left and 90° only. This external print in place hinge helps to open 180° or to right side. See the pictures Use strong double sided mounting tape. Wipe with Acetone and Isopropanol (in that order!) to…
First off: I do NOT advise trying this unless A) you are fairly mechanically inclined/crafty, and B) are ok with potentially boat anchoring your shiny fresh new U1 with no parts availability yet lol parts are available now but still…
GU10 spot, with cap, connectors and clamp clamp_counter: print on its side, with supports both connector bases: print vertically with screw on print plate. With tree support. For extra satisfaction: aim to get it off the build plate in…
i have a 2 year old that can reach and unlock my door, whilst i could set up an automation to stop this thats just annoying as then we cant leave the door unlocked when we want to. so i developed this (my first 3D model) a simple cover…
The heatsink of a Noctua NH-U12A is quite large and heavy. Although the motherboard should be capable of supporting its weight under normal circumstances, I don't want it to destroy my motherboard under less ideal circumstances…
ENGLISH: Finding GU10 LED lamps that also have a narrow focus for accent lighting with good colour temperature and colour fidelity and good dimmability is very difficult. I gave up at some point and designed these focus rings for myself,…
2026/01/26 update: Added dual stack mount to mount 2 module at once. Remember to cross the wires as the are mounted opposite with each others. ===== 2025/10/15 Update: A user asked for source Fusion360 file so I've added it. ===== I…
This is an upgrade for BLV Mgn Cube. The BallScrew is SFU1204, 450mm. (threaded size 390mm) (1) BF10 Bearing (Upper End) 608ZZ (22x8x7) (1) BK10 Bearing (Lower End) 6200 (30x10x9) (1) Motor Mount (1) BK10 (1) BF10 (1) Hiwin Lock +…
all information concerning the original model and componants to buy could be found in cjbaar github. https://github.com/cjbaar/Prusa-Firmware-MMU-12x it has to be mounted taking into account mmu2 and MMU3 prusa assembly procedures. i…
Why and what for This will allow you to connect 4mm OD (standard size) PTFE Tubing to Autofeeders of Snapmaker U1. You can customize all the colors. Discussion topic -…
These are stands that connect to the Top of Snapmaker U1, 4 stands create a base that you can put a low cost Top Cover over it. Feel free to adjust it to match your need. There are 2 files: 1 with 1 stand only. Another is 4x stands for 4…
Remix of jju182s poopholder to fit 10x3mm magnets (needs glue).
German: #Beschreibung Ein Spulenadapter für die Alten Sunlu V1 Spulen auf dem Snapmaker U1. Der Innenring kann aus TPU gedruckt werden um die “Hemmung” auf dem Adapter zu erhöhen und ein herunterfallen zu verringern. Das Modell wurde auf…
The main goal of the project is to create the best possible thermal and acoustic insulation. I understand that it's cheaper to install an ugly IKEA box, but it's more of an ugly decoration than a real cover. The goal was achieved. The…
1–4 spool holder system for the Snapmaker U1 direct feed inputs, with optional low-friction rollers. TPU tested down to 70A, including multicolor / multishore prints. Description While testing soft TPU on the Snapmaker U1, I developed…
Reupload of Beaver Works 's great work that he uploaded to MakerWorld The official Snapmaker top cover costs a whopping $249 ... and my wallet simply did not approve of that purchase. So, I had to take matters into my own hands and create…
Enclose a Snapmaker U1 3D printer in a standard 15-unit 19" server rack. This project is a guide and a set of 3D-printable parts for enclosing a Snapmaker U1 3D printer inside a standard 15U 19" server rack. You can also find this project…
Introduction Quite a few people keep their Snapmaker U1 close to the floor which makes the touchscreen a bit harder to see and use. This mount allows tilting the touchscreen upwards for better visibility and usability. This is not an…
Podstavec skála pro lampu planet velikosti 20cm se závitem a pro žárovky s paticí GU10
The ridge should hook fairly firmly, but I still taped it to the back just in case. Please use the cover, hepa, and fan case from the original model.
This is a tool holder for the Snapmaker U1. It is made for the set of tools that came with the printer. The tools are easy accessible and don't interfere with the spool holders. The tool holder attaches to my top cover adapter which has…
Basic tool tray for most of the tools that came with the Snapmaker U1 printer. As per the original model by Gur (which the model I remixed is a remix of), use the screws that were holding the buildplate down to attach this to the holes at…
First off: I do NOT advise trying this unless A) you are fairly mechanically inclined/crafty, and B) are ok with potentially boat anchoring your shiny fresh new U1 with no parts availability yet lol parts are available now but still…
Ho creato una base con cassetti per la mia Snapmaker U1,io ho usato la versione senza cassetti laterali è molto solida ma ha avuto bisogno di molto filamento, cosi per risparmiare filamento ho deciso di includere nel progetto altri due…
The original Toolholder requires quite a bit of support to print, and it leaves a rough suface on some larger areas. Since the part doesn't see too heavy loads the print orientation shouldnt matter that much. Print the two parts and…
I decided to create this mod after noticing how sharply the driver temps changed up and down, this led to me tearing my U1 down to investigate. What I found, was that the stock heatsink was placed on the topside of the driver chips.…
Made a mount for Tapo C120 camera for the Snapmaker U1. Printed with PLA and fits nice. Ignore the terrible camera screenshot because I didn't adjust the camera focus yet. I ended up printing it the same way in the 3mf file and added…
The original spool holders are a bit difficult to take a lot of spools on and off. I think they did it that way so RFID spools would stay nice and close to the reader, but if you are like me and not using that much Snapmaker filament so…
This is not an enclosed top mod. I have no plans of printing high temp materials on my Snapmaker U1 but I did want to cut down the noise level since the heads/fans are right at the top and can be quite loud. My solution was a modular…
The original feet on the U1 are "not the best" and I had an additional pair of anti-vibration feet from my P1 laying around, so I came up with this small adapter to use them on my U1.
Tool Holder for Snapmaker U1 NO SUPPORTS needed. Single screw fixation, Handle position of scraper and brush are optimized for quickly Nozzle needle container sits underneath the scrapper. Plier is held in closed position to minimize risk…
Slightly modified the original spool holder from John S. Raised the latch so the holder has support at the bottom from the panel. Also thinned the latch arms so they bend a bit easier without breaking. I stuck on some teflon tape to let…
8/15/26 Update: I've since learned that the grille on the bottom isn't for cooling any electronics—It's just a hole that goes through the bottom of the machine for no apparent reason. Added a solid cover print profile to help retain heat…
Modified Orca Slicer settings for Snapmaker U1 printed with eSun PLA+ and PETG
Tool to make removing the PTFE tubes on the Snapmaker U1 (or any printer with 6mm PTFE tubes) easier.
I Remixed the 4x Hotend Holder for attaching them to Ikea Skadis
This model tries to immitate the original Snapmaker U1 spool holders. It is ment to be used in conjunction with the U1 side dry box made by 三文 (@sevenxiaoyu) and published at…
I recently got a Snapmaker U1 and wasn't satisfied with any of the tool holders out there. I tried the one that goes inside but found it annoying to have to open the door every time I needed my tools. I decided to use a hole on the top of…
An alternative snap-fit connector to the one used in spool holder SnapMaker U1 by cavecchia.andrea77 *This is only the connector that fits in the mounting holes of the Snapmaker U1 and requires the rest of the components located here:…
The stock bed‑leveling knobs on the Snapmaker U1 can be stiff and difficult to turn during manual leveling. To make the process smoother and more comfortable, I designed a simple grip‑enhancing tool that fits over the existing knobs and…
The snapmaker U1 door opens to the left and 90° only. This external print in place hinge helps to open 180° or to right side. See the pictures Use strong double sided mounting tape. Wipe with Acetone and Isopropanol (in that order!) to…
Tested on the Snapmaker U1, should work on the BambuLab A1/mini AMS units too.
Here is my design for the SNAPMAKER U1 top cover. It was created so that it could be printed on this printer. Some elements require supports (top element), others theoretically do not, but for stability I had to add them anyway. The cover…
If you removed the Snapmaker U1's spool holders and want to keep them neatly stored on the edge of the Samla 45L tophat. Works with any Samla Tophat mod that leaves the lip opening exposed. This is design is intended for storing…
I printed the Samla top cover and noticed a hole in the back of the cover that I did not know the purpose of, so I made a mount for my Wize Cam on my A1 Mini that fits in that hole and can look down on your printer.
We all know the IKEA SAMLA top covers for Snapmaker U1. I didn't want to drive to the nearest IKEA so instead I went to ACTION and picked up a larger 60L storage box (link) and spent way longer designing this adapter than the IKEA trip…
UPDATE: I have replaced the profiles with ones containing four build plates. The following versions are included: V1.0 - classic version with feeder holders that fit snugly to the housing curves, PC4-M6 V1.1 - classic version with feeder…
To allow both automatic feeders to operate from my SUNLU S4, I relocated them to the same side of the printer. I moved the RFID board from the left side to a position beneath the main board on the right. I fabricated a standoff for the…
This model is designed to help relocate your Snapmaker U1's filament feeders to the position of your choosing. My bracket is designed to clip onto wire shelving with 30mm on-center spacing (3mm rails), but can be easily customized in your…
And another spoolholder for the snapmaker U1. It is a complete makeover of an existing one at maker world. You'll find two different sizes. The short one holds spools up to 66mm width, the long one up to 88mm. You'll need 2 bearings 608…
I initially printed a front and rear tray from other users on here and whilst very good, I felt a few features could do with improvement, so these are all inspired by the great work of many others but rebuilt from the ground up. My…
With Paxx12's extended firmware for Snapmaker U1 , you can use custom RFID tags for your filament and the U1 will automatically recognize the properties for each tool head. This works great when you put the spool with the tag on the spool…
Honeycomb storage wall Snapmaker U1 build plate holder. Only support needed for the high knob.
A larger, beefier door handle for the Snapmaker U1. Use existing hardware. a 10x3 magnet can be added to the back and lines up with my Lefty Door Mod . 10x3 magnet -…
IKEALLER cover (v2.3) Snapmaker U1 enclosure by @AMelo BEST Snapmaker U1 enclosure design. Similar filament usage, printing time and hardware cost of IKEA bulky adaptor solution BUT with much more functionalities and style. Designed to…
You can use this to place the feeder on the right side to connect it to a dryer
Remix of great motor cover - i made it thinner and without a cable compartment.
Bowden Collet und Clip, 4MM Collet Extruder Plug Parts used: Amazon AliExpress
This is a simple remix of the original PTFE Holder and Organizer for MMU . The original model supports 5 PTFE tubes , which works for the standard MMU setup. Since I built an MMU12X , I needed versions that support more tubes. So I…
This is a small remix of the original Tags for MMU PTFE Tubes . While building my MMU12X , I needed tags for more filament paths, so I extended the numbering to 1–12 . I used the Hevi font for the numbers to make them easy to read. I’m…
***Note*** You can print the fan system parts, and as soon as my fan gets in, i will make an installation video Hi gang :) Made this full cover with the front door to help keep our temperature inside and also to have full access from the…
Holder from CKCS U1E (Implemented on the XMP52C microcircuit) Screws for fixing module - m2.5 (6-8mm)
The Snapmaker U1 has a massive gap between the door and the chassis. This gap remover should help retain more heat inside and also reduce the noise coming from the machine with the door closed. Instructions Print in TPU. I used 95a. Print…
Snapmaker U1 Full side Dryers system Hi gang :) So here is my crazy invention/addons for a pair of dryers to keep filaments under dry control and to help also cooling down the drivers and PSU as modification to the existing intake ports…
Seal for the base of the Ikealler Snapmaker U1 cover Print in TPU
If you are like me and directly feed your Snapmaker U1 from filament dryers and have taken off the snapin spool holders, this stand will allow you to repurpose your spool rollers into free standing units you can use elsewhere.
Este diseño te permite reutilizar los portabobinas originales de Snapmaker anclándolos directamente a los laterales de un armario IKEA PAX . Al sacar las bobinas de la estructura de la impresora, consigues un espacio de trabajo más limpio…
Diese praktische Halterung wurde speziell für die sichere und optimale Positionierung eines Chitu Mini Heater H2 im Snapmaker U1 entworfen. Sie ermöglicht eine stabile Befestigung und sorgt gleichzeitig für eine gezielte Luftführung…
IKEALLER toolbox Very professional looking toolbox for U1 that includes snapmaker logo ! Great design matches the U1 when printed with this light grey and black lining . It keeps you most used tools at hand! 26.may.26 update includes OPEN…
I didn't like the cable routing for the Panda Breath on my Snapmaker U1 so took the plunge and decided to drill a hole in the back window. Easily plugged if necessary. Use the drill guide (with the flat edge against the bottom outside…
i made cover for external fan for X,Y stepper driver for snapmaker U1, thaht allow instal noctua 40x40x10 mm 5V fan from noctua without printer diesasembling. Fan is powered from USB port of U1. Fan is blowing air to inseide U1. Printed…
I was tired of my PETG mixing together with PLA with no proper way of telling which apart. Which led me to model a splitter to ease my suffering of not being able to recycle into new spools. May conflict with Panda Breath Heater, I'll try…
Yellow boxes in the .3mf are modifiers to ensure the hooks are printed solid.
Onshape design link: https://cad.onshape.com/documents/7a18dc97c1fd44bf1453750e/w/434428d8f582cec4f55f5570/e/0894672750969afab744cd6c?renderMode=0&uiState=69c63f9d2253924c1a19ac07
Snapmaker U1 gridfinity storage, make it possible to use the back inside the printer to store up to 1x6 gridfinity boxes. Perfect for hotends and other spare parts for Snapmaker U1.
I have my U1 in a tight space and wanted a solution to avoid having to drag my printer to the sides to make room whenever I needed to load spools. RFID tags still work. I recommend PETG. REMOVAL INSTRUCTIONS: you need to rotate the…
Deutsch: Ein Wandgemälde im Snapmaker U1 Style. Der Druck sollte in Weiß stattfinden auf Dunklem Hintergrund. Natürlich kann der Druck auch angemalt werden um etwas mehr Flair zu geben English: A Wall Art from the Snapmaker U1 Print it in…
I've designed this Box to stay in front of the printbed, holding the most needed tools and collecting the small plastic pieces ;) The printbed can move up and down without contact and the recyclebin can be emptied easily. If You like the…
Filament spool holder for the Snapmaker U1 printer. The design is based on a cylindrical structure with two standard 608 / 608Z bearings. It allows the spool to rotate very smoothly and freely, while also supporting all spool sizes,…
UPDATED: The Vented Version is considered the current version and can be used for vented or non vented but it's a little easier to assemble. The reversed thread knob is for for the right side of the non vented files so you probably will…
Fan Duct for the PSU and the Mainboard of a Snapmaker U1 to improve the cooling and isolate the cold air flow from the chamber. I also publish my CAD (FreeCAD) and STEP files for further remixing Printed with ABS for heat resistance.…
Description (EN) This model is a stylized 3D interpretation of the legendary Turkish actor Kemal Sunal, inspired by his iconic role in the classic movie Tokatçı . The design captures his characteristic facial expression and outfit in a…
I made mounts for the side panels to hold tools for the Snapmaker U1 printer.
Two versions... one that I tested and it worked fine, and another that should fit a little more tight on the stock spool holder grips. Print in either PETG or PLA.. whatever works best for you.
Replacement battery door for Agilent/Keysight U1271A and U1272A multimeter
Description These Corner Alignment Guides are designed to keep a Sterilite 58‑Qt bin lid more secure when used on the Snapmaker U1. This setup is meant to reduce overall noise while still allowing airflow around the machine. This design…
I had some old spools of filament and they had much larger diameter holes which don't work well on the U1 spool holders. So I made this. I added the Fusion file if someone wants to mess with the sizes. Sorry if it's quick and crude, but…
You also installed the original spoolholders and then found out they are "not good"? Then you also struggled even more to remove them again, fearing to break the whole sidepanel of the printer? You searched for alternatives, but they all…
UPDATE: I have gotten some feedback that people want a plate rack included. I like the idea, if you are interested please mention it in the comments and if ya'll really want it, I'll get to work on it and include the files. Printers under…
I wanted to use the space on top of the IKEA Samla bin that's living on top of my Snapmaker U1 ( see here for the mount ). So like any good 3D printer owner, I slapped some gridfinity on it. This gives you a 8x12 gridfinity baseplate that…
This tool tray mounts directly in the front of the Snapmaker U1 using the shipping screws. It holds the scraper, snips, cleaning brush, hex keys, spare spring, spare screw bags, and has two extra storage areas. Fits flush to the front of…
Holds a 40x40x20mm 5vdc fan between spools 3 and 4 of the Snapmaker U1. Clips into the existing vent holes so no need to disassemble or modify the case or use tape. Remix of Full_covered_40mm_fan_cover_aimpoint.stl by pakkko/Dennis Romje.…
First of all, a big thank you to ShelbyCob for the excellently designed top cover. This top cover is my favorite of all, the front flap locks into two positions, and the fit to the printer is perfect. With other top covers, you have to…
Here are some simple and handy toolhead holders for those of us who swap out the toolhead to change exextruder diameters of our extruders. There are two types: One for toolhead #1 (leftmost) and another for the other three, #2-#4. You can…
Top cover for the Snapmaker U1 3D printer. A 60L container (59cm x 42cm x 36cm) is used. Printed with a layer height of 0.2 and a line width of 0.65 , infill density of 10% with a Gyroid infill pattern. Total weight is approximately 320g…
![[Remix] Prusa Core One / MK4 Nextruder Magnetic Poop Holder V2 by jju182](https://media.printables.com/media/prints/aabb7198-2ffc-4286-8ba4-9ff5ee1b0d63/images/11202208_068412d9-f933-4058-85ab-6e01751062ed_26882f2d-e547-48e4-b4f4-87325e71d7b0/img_7439.jpeg)
