1 / 2
Midwest Critter Nation Rat Cage Feet — zdjęcie 1
1 / 2

Midwest Critter Nation Rat Cage Feet

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Informacje o modelu

Źródło
Printables
Kategoria
Pets
Licencja
Creative Commons — Attribution — Share Alike

Feet for a Midwest Critter Nation Rat Cage to stop the cage scratching tabletops when it is moved.

The cage stands are ~15mm x 15mm wide and have about 25mm clearance from the bottom of the cage.

The feet have a 16mm x 16mm hole that is 20mm deep. To secure the feet to the cage stands, there is a grub screw hole in the feet that fit an m3 screw or grub screw.

You'll need 1 m3 screw/grub and 1 m3 nut. To insert the captive nut pause the print at layer 69 @ 0.2 layer height.

Print Settings

Printer Brand:

Creality

Printer:

Ender-3 S1

**Rafts:**

No

Supports:

No

**Resolution:**

0.2

Infill:

30%

**Filament:** PolyTerra PLA Pink

Notes:

Pause print at layer 69 @ 0.2 layer height to insert m3 captive nuts.

Category: Pets

Tagi