Liczymy pasujące modele…
NEW MODEL 03/25 with POWER BUTTON on the front ! Improved model with mechanical POWER BUTTON extension on the front. An again improved and redesigned body for better print quality. Fits on building plates of all PRUSA Mk3,MK4, CoreOne or…
Wydruk około 0,05 €–0,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
After verifying several violations of the original license (CC-BY-NC-SA) applied to my models, I have decided to change the license used for my files. Although the new license (Standard Digital File License) would normally not allow…
Wydruk około 1,22 €–1,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Reminder that PETG is better outside than PLA. Might benefit from spraying with something UV protective, either way. Made it with https://www.printables.com/model/125714-bird-feeder-for-small-birds/files specifically in mind after…
Wydruk około 12,52 €–15,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print with a perimeters of resulting thickness > 2.4 mm or with 100% infill Supports are only needed for the cap (paint them in slicer) Silicagel drying balls with diameter d > 2 mm Base dimensions - 85x35 mm, Height - 175 mm Capacity: up…
Wydruk około 13,48 €–16,47 € nettoWstępna wycena jednego wariantu
Anatomical rib cage and upper torso wall art featuring bold, clean line work. An eye-catching decorative piece suited for modern interiors, studios, clinics, or gothic-themed spaces. ### 📌 Recommended Print Settings: - Material: PLA /…
Wydruk około 0,66 €–0,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Just a simple mount for the Walksnail VTX and new Caddx GM3 Gimbal that you can use or modify to fit your needs. It has an additional mount for 40mm cooling fan, because the Moonlight VTX heats up very quickly without an active airflow.…
The 3D surface provides extra grip while the base remains thin and playable. Whether you're riffing through a thunderous solo or just want to show off something sick on your keychain, this pick brings both flair and function. Print it in…
Intro Three storeys to give your Gecko a choice of environments. First Floor: Nearly completely hidden Second Floor: Protection from above and 3 sides, but a wide outward view Third Floor (Roof): High but unprotected position to observe…
Personally, I didn't find 3D_Workspace's version with square walls aesthetically pleasing, so I rebuilt the whole thing from scratch in Illustrator, then export it to Tinkercad. I only kept the threads, those worked really fine. You can…
If, like me, you've ever had a queen bee fly away :-( Queen excluder to slide over the Nicot® transport cage lets out companion bees but not the queen. space between bars is 4.5mm --------------------------------- Si comme moi vous avez…
This model is compatible with the lego system.
Camera cage for the Lumix GX80 / GX85 camera. I designed the cage because the cages for GX80, which is still a good camera, are no longer available on the market. The cage contains a number of 1/4" and 3/8" UNC camera threads, known as…
adds a bigger bottom plate to the trim router for increased stability and better dust collection. I used PETG for improved strenght. Top plate might need some supports. Used hardware: 4*M4x8 4*M4x12 4*M4 threaded inserts
Showcase the striking structure of the human form with this detailed Human Ribcage Skeleton Display. Featuring a full ribcage connected to a complete spinal column and partial pelvic structure, this sculpt captures anatomical realism with…
Base Plate & Roll-Cage parts made of ASA for CADDX GM3 Gimbal to be mounted on an AOS frames, model UL7 and probably Cine35 EVO . To check if it will fit other frames before printing everything, just print the “base” piece…
Boîte pour silicagel (dérivée d'un modèle à découper au laser) Le couvercle se colle quand la boite est remplie de silicagel. Il faut secher le silicagel quand il est saturé. Exemple de Déshydrateur pratique :…
I found the original design to be a bit too flimsy and easy to bend with the regular round legs, especially when you have a tall plant that leans on it, because the legs could be pulled from the holes with ease. I recreated the design and…
Kryptonite U-locks often come with a two-part bracket designed to be strapped to a tube on the bike's frame. On a folding bike like mine, there isn't a good place to put the strap where it won't be in the way or slip down constantly, so…
Printed with: -MK3S Revo 0,8mm nozzle PrusaSlicer settings: -0,40mm QUALITY -Prusament PLA -0,8 nozzle Dimensions: X x Y x Z 110mm x 60mm x 26,6mm
Oh no, not again another ball bearing... Sorry, but I just have to show my final design. jonathanw's comment on my last ball bearing ( http://www.thingiverse.com/thing:57762 ) gave me new ideas. I reduced the bearing to three parts. The…
This is a flywheel cage and wheel set for the FDL-GONK, designed to use the new 2207 “Plus” brushless motors from Kelly Industries. The wheels themselves are designed strictly to be printed in sls, as the design is closer to zero…
Dispenser box dimensions: (mm) 42 x 31 x 11
Here at DMF we are all about fixing minor inconveniences from stock blasters. The RAGEFIRE cage was not aftermarket motor friendly. So I present the RAGECAGE. The crush is set at 42.5mm and fits with the stock cage insulators. You could…
Attach brackets or items needing bolts/screws to roll bars or roll cages. 2 small pieces allow for a 1 ½" to 2" pipe clamp to go around the outside and compression fit to the tube. Mount things to your off road vehicle, boat, RV, or…
I created this for my RSM 130 inTank media basket but you can likely scale it to your application if measurements are similar.
This is a cheese grate camera cage for the Panasonic GH4. https://www.thingiverse.com/thing:1691475 was the inspiration for this cage, but this was measured and modeled from my camera from scratch. This cage has a proper hotshoe catch to…
This holds a Tentacle Sync E inside the stich line making it invisible when shooting 360. I was tired of using velcro, and Habr had made a very nice case , so I moved the shoe where it needed to be and added small bump stops to make it…
A cage to fix the Sumup 3G+ payment terminal to a table
About Server Rack Cage Nuts & Screws Replacement This is Server Rack Cage Nuts & Screws Replacement tested with Modular 10" Server Rack! - Mod10 by MandicReally. Might work with other server rack projects (or industrally fabricated racks.…
We have vegetables starting inside to beat the cold this year and a lot of them really took off. My wife asked me to look for a tomato cage and I couldn't really get one to print in the size I needed so I designed one myself. This prints…
Simple little adapter for Kryptonite u-lock mounts. Unscrew your mount through where it rotates, drill the hole out to fit an M5 bottle cage bolt, and use this to ensure it stays in the proper orientation. Allows for the same 24 angles of…
Having printed and attached the mount for the Sunlu S1 dryer I've found I haven't needed it as much. I didn't want to keep removing it. So this is set of rollers that drop into the bottom of the mount. It allows you to leave the mount…
its a triple stage rival flywheel cage
Model madę to attach with double sided tape to the bottom of the unit for the Senheiser EWD G4 IEM pack to slide in when you want to travel in a small flight case or travel rack with the sender pack could need slight adjustments depending…
Summary PLAb System and Example Use Cases A component of the growing PLAb Collection of 3D printable optomechanics. This is a variable width optical slit mechanism with independent control of each side. It leverages a print-in-place…
I had trouble getting a good fit with the original model. It was too loose for the Racedayquads 250mAH "HV" Batts that I run. I measured a battery and drew my own version of this from scratch with inspiration from the original. This has a…
Introduction A mount for the Specialized EMT Mini multitool on the bottle cage mounts of a bike. The tool has a snug fit, but for mountainbike-purposes I strapped it down with a velcro strap. Print instructions Personally, I used 50%…
Compact screw-on container designed for holding silica gel or other desiccants. The model consists of two parts: a threaded lid and a bowl-shaped base. Small ventilation holes in the bottom allow moisture to pass through while keeping the…
This is a simple screen cover for the GoPro Hero 8 to work together with the official Rollcage Case (AJFRC-001). I designed this for the usecase when the camera is mounted backwards (outside a car, a bike or everything else) to protect…
The pack rats found their way into my range ducting, they ate through the fan blades. I couldn't find spare part so I printed it. If you print it be sure to mirror them to make the blades run in your desired direction. I did glue the 2…
This is a small cable and simple cableclip for bikes with external cable routing. It secures the cables under the bottlecage or even without a bottlecage. It reduces rattling and makes the cable routing look more clean. The clip workes…
Hamster Cage Clips are 2-piece clips you attach to the top metal wiring of cage walls, allowing taller walls or roof. My hamster has learned how to climb the metal bars of his cage, so I need a way to make the cage slightly tall. So as…
You'll need 2x M5 Nuts 2x M5x10 bolts (the kind you'd use for a bottle cage) 2x 4.8mm wide zip ties Print with organic supports. Press the two nuts into the nut cages put your water bottle cage on with the bolts, and it will just clip…
*2024/10/14 Added a skeleton version for better sight.
A replacement for mounting SSD drives in PC cases. It can hold up to 5 SSD drives. The design also includes holes for at
A simple bracket that with some zip ties and tape can seccurly add an m5 mounting point to any round tubing. Origionaly designed to put water bottle cages on my fork they have been usefull elsewhere on the bike as well including on my…
Noticed that my silly little Budgerigar (parakeet) kept using its water bowl as a bird bath and struggled to actually fit and got stuck more than once. So i rigged this up and included the ramp and step bumps as a way to both give the…
This is a two piece chastity cage for use with a small padlock. I made it for someone else so have not tested it myself. I have only made one size here which is on the smaller end, but I think I might try to make a few more sizes in the…
This is my second case design, a case for the Skelett 40 by Novelkeys. The design is 100% 3d printed with no screws or additional fasteners. The case has options for either full WK bottom row or HHKB blockers. The case in the photos is…
🔧 Rear View Mirror Mount for 38mm Roll Cage – Locost Build Upgrade your Locost or lightweight build with this 3D-printable rear view mirror mount , designed for a secure and adjustable fit on a 38mm roll cage . 🏎 Features: ✅ Secure Fit –…
Another Airtag mount that fits under a bike's bottle cage. This one is designed to go under the seat tube bottle cage, and sweeps back to hug the tube closely. You could say that this is for aerodynamics, but I just wanted to make sure…
une protection de la cage avant et son aileron de retournement pour le stingerbee de newbeedrone /a front cage protectio
The 3D surface provides extra grip while the base remains thin and playable. Whether you're riffing through a thunderous solo or just want to show off something sick on your keychain, this pick brings both flair and function. Print it in…
A holder for the Abus Bordo X Plus (6500) to put it in your bottle cage/holder of your bike. I printed it for my dad, because the lock is kinda heavy. Does make a bit of noise, but it still gets used sometimes when my dad goes out cycling.
Motivation The third iteration of a bottle cage that can hold relatively tall bottles and is relatively lightweight. I found that the previous version often had a lot of bulging seams and zits which could scratch my bottles, so I wanted…
There are some designs out there trying to solve this problem. But i think that this is the most elegant solution. A way to lock your Shimano rear derailleur Cage. Permanently mounted to your rear derailleur while looking nice. It…
Print angle as oriented. I printed PETG-CF at 0.20mm layers with 3 walls and 15% infill. Perfect balance of flex and strength, with an excellent finish. I added a side loader model, but have not had a chance to print it yet. If you try it…
Keep track of your ride and your gear with this self-designed, AirTag-capable water bottle cage. Engineered for durability, it’s been tested to handle the punishing vibrations and impacts of harsh mountain biking while still keeping your…
adapter for bicycle to move down the bottle move 10cm down from standart holder use this model as u want with out any limitation! i add source file i use petg 5 walls infill 20%, no cooling its around 30mins to print use small trick with…
Designed specifically for budgies, this breeding house combines safety, comfort, and functionality. Its smooth, fully rounded corners ensure your birds can move freely without risk of injury. The floor features small slits that allow…
So After I bought a tripod with an arcaswiss mount, I was annoyed since my zve10 didn't have an arcaswiss mount allowing to be attached on portrait, so I remixed this thing to be screwed on the cage's sides uses 2 1/4x10 screws
This component was designed to securely transport a Club Mate bottle, ensuring it won't fall out of the holder even on cobblestone roads. After a tragic fall of a Club Mate bottle on the cobblestone pavement in Kreuzberg and the resulting…
This cage is made for PWS supermicro PSUs. I tried it with PWS-721P-1R and PWS-1K28P-SQ
Bird cage tray clip designed to secure the bottom tray of a bird cage in place. It clips on easily, keeping the tray stable and preventing accidental sliding or removal.
This 3D printed decorative bird cage with a heart inside is a delicate and symbolic design, perfect for gifts, ornaments, or romantic decorations. The model features a finely detailed metal-style cage enclosing a vivid red heart, creating…
Losi Micro T Roll Cage Body – 3D Printable Body Shell This 3D printable roll cage body shell is designed specifically for the Losi Micro T, giving your RC car a rugged off-road basher look inspired by desert racing and rock buggies. The…
I had a 2,5" SATA SSD lying around. So I wanted to fit it to my newish HP ZBook Fury 15 G8 but it didnt come with the apropriate cage. So I designed this one. It slips under some montign brackets in the frame of the Laptop therefore it…
Hello, to have more space on my bike I designed this holder on the fork. I use it to fix my mattress and my tarp one on each side. It hast been working very well so far and I like the design a lot. I use 2 straps to fix my gear and you…
I used this HDD cage for my homelab server. Because the server case was originally a mining case for 12 GPUs, it had 0 HDD slots. I printed the main body + the reduction caddies from PETG, and the rails from TPU, which significantly…
Use this small clip-on to secure a blanket to a animal cage. The outer distance of two "cage-bars" is 20mm for me, model inner size is 21mm, which is perfect for when a blanket is in between. It creates a snugg fit. I printed in 0,12mm…
Cover to make the 10 mm wide air vents unescapable for mice in a GuineaLoft™ Acrylic Cage (Model-P2) ( https://www.amazon.com/gp/product/B0D26GMH98/ ). Air vents still let air through, but the vents gets smaller. Some mice can get through…
Technical details Mounting position: between bike frame and bottle cage Fasteners required: 2× M5 × 30 mm screws Compatibility: Standard bicycle bottle cage mounts (M5 threads, dimensions can be found on the uploaded picture) Apple AirTag…
This replaces one of the 3.5" drives on the Fujitsu FM77AV with a gotek. It's designed to fit one of the larger (small) oled screens, but the Fusion file is included if you want to modify it. I recommend printing at a relatively high…
Organize your workspace with one of these sturdy pen/pencil holders, featuring four designs of distinct cage grid lattice patterns. These stylish organizers are optimized for 3D printing and ideal for storing pens, markers, brushes, or…
Print Settings Printer: Tronxy/Zonestar p802m Rafts: No Supports: Yes Resolution: 0.1 Infill: 100% Filament brand: Smartfil Filament color: Natural Filament material: PLA Notes: 30 mm/s d'impression et 20 mm/s pour les parois
I printed mine in PETG, 0.40 mm nozzle, 5 vertical walls and 100% infill. It locks the lock in place, I'll probably work on a don't-need-to-unlock-the-lock-to-remove-it mount in the future.
UPDATE FEBRUARY 17th 2026: The cages have actually been tested in more than just the Stryfe, and updated to fix glaring issues with compatibility with a few blasters. Cages have been made modular, adding 3 options for adapting the cages…
Having printed and attached the mount for the Sunlu S1 dryer I've found I haven't needed it as much. I didn't want to keep removing it. So this is set of rollers that drop into the bottom of the mount. It allows you to leave the mount…
For printing, I used ASA and PETG-CF with 30% "Honeycomb" infill and a 0.2mm layer height; both materials showed similar strength. If your printer is well-calibrated, you don't need to enable supports for the insert holes, as any slight…
This is a port hole cover designed for small pet cages. If you're not using the runner tubes and need to block the port hole covers, this should snap into place. The cover itself is 70mm across. The edge to edge measurement for the catch…
Rack Rail for test builds. No Supports needed. Printed mine from PETG. Added second model with 2 holes per 1U
I modified this to be able to use a typical USB C socket easily sourced on amazon. https://www.amazon.com/dp/B09WCSF8FC note you'll need to use a USB A to USB C cable unless you like to soldier tiny surface mount resistors Print with the…
Hamster Cage Clips are 2-piece clips you attach to the top metal wiring of cage walls, allowing taller walls or roof. My hamster has learned how to climb the metal bars of his cage, so I need a way to make the cage slightly tall. So as…
What is Foiled The goal behind this project is to have a cheap and accessible physical signal blocker for everyone that is: Simple to construct, Robust enough to be used multiple times and thrown in a bag or backpack Quick and easy to…
Kann mit 4mm Holzschrauben von unten an ein Regal befestigt werden. Funktioniert sicher auch für viele andere Kopfhörer. Ich habe es aus PLA mit 4 Perimetern gedruckt.
As my 750ml fidlock bottle is too big for the original bottle cage mount of my bike, I designed the plate to shift the mounting point higher so the two bottle will not interfering with each other. I will recommend the 9.3mm version as it…
Add visceral horror to your collection with this Half-Skeleton Zombie Bust , a striking undead display model sculpted with unsettling anatomical detail. This terrifying figure features an exposed ribcage, skeletal facial structure, and…
print it upside down, for the most important surface of the hot end interface, the horizontal top surface. PPA-cf material was my choice for best stiffness and heat resistance. You will need to modify your front and back covers. You will…
This is a simple support bracket to connect a Tilta Pyxis cage with your L to PL-Mount adapter.
I printed "Camelback water bottle cage for bike" by theprintalot, and it works pretty well and is easier to print than some of the 1-piece bottle cages, but there were a few things that I wanted to change. I don't like multi-part print…
The Riot is a 3D-printed flywheeler designed by Chance. Essentially, it is a larger, full-sized wheel version of the Blitz micro-wheeler created by the same designer. These alternative flywheel cages are variations of the original 40.0mm…
The top of the tool holder is an interference fit and as such must be printed in a flexible material, I used Esun 95A TPU, the bottom I printed in PETG both with 25% infill and did not use any supports. It is just large enough for a 29er…
A melted candle I made to learn some basic Blender. Happy printing :)
Showcase the striking structure of the human form with this detailed Human Ribcage Skeleton Display. Featuring a full ribcage connected to a complete spinal column and partial pelvic structure, this sculpt captures anatomical realism with…
A small cage shelter for shrimp fry, to avoid being harassed by adults.
#WORK IN PROGRESS# Takes 2 92mm Fans in the front, uses M3 heat inserts and bolts to join Printed Parts; 4x Front and rear panels 2x Side Panels 4x Base Plate 2x Rear Brace Piece 4x Rear Panel Reinforcement
