1 / 5
Roll cage pipe clamp attachment point for 1.5" tube.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Attach needed items to a roll cage or roll bar with pipe clamps
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 511
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (16)Powiązane
Attach brackets or items needing bolts/screws to roll bars or roll cages. 2 small pieces allow for a 1 ½" to 2" pipe clamp to go around the outside and compression fit to the tube. Mount things to your off road vehicle, boat, RV, or whatever you need. This print should be done in ABS. The pictures are showing a .2 layer. It would obviously look better at .1 but take twice as long to print. Hole for mounting easily accepts ¼" bolt but recommend a socket button, pan slot or RH slotted.