Server Rack Cage Nuts & Screws Replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is Cage Nuts & Screws Replacement for Mod10 – The Modular 3D-Printed Mini Server Rack. Might fit standard racks.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 569
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- GNU General Public License v3.0
About Server Rack Cage Nuts & Screws Replacement
This is Server Rack Cage Nuts & Screws Replacement tested with Modular 10" Server Rack! - Mod10 by MandicReally.
Might work with other server rack projects (or industrally fabricated racks.
Uses M3 threaded heat set inserts, M3 bolts and nuts and makes things a bit less clunkier than M6 cage nuts and bolts used as a standard. Might save you few bucks as well.
Bill of Materials
| Part | Size / Standard | QTY | Source |
| M3 bolts | M3x16 SHCS | ∞ | Buy here |
| M3 nuts | M3 | ∞ | Buy here |
| M3 threaded heat set inserts(M3*OD:5*L:4) [1] | M3x5x4 | ∞ | Buy here |
Note for Bill of Materials
| [1] — 4 - 5 mm of length for threaded heat set inserts will be perfectly fine for this particular application. |
Assembly
Print guidelines
Here are print guidelines for you to follow in order to have decent success with printing parts:
| 3d printing process | FDM (fused deposition modeling) |
| Infill type | Support cubic, Grid, Gyroid, Honeycomb, Triangle or Cubic |
| Material | ASA, ASA-CF, ABS, ABS+, ABS-CF [1], PETG, PLA |
| Infill percentage | 40 |
| Layer height | 0.2mm, recommended |
| Wall count | Recommended: 4 |
| Solid top/bottom layers | Recommended: 5 |
| Extrusion width | 0.4mm, recommended |
Change log
| Date | Changes |
| 10.11.2025 | Initial version |