Modular Wet Palette
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Characters & Monsters
- Licencja
- Creative Commons — Attribution — Noncommercial
Modular 3D Printed Wet Palette with brush storage and dry palette.
Demo video: youtu.be/iYq_sJFmXDk
Outer Dimensions: 230mm x 200mm
Magnets: 92pcs. 5mm Diameter 2mm Thickness
Sponge/Paper: 200mm x 140mm
The magnets on the side are optional and used for optional extensions.
Currently the lid will magnetise to the bottom when laid as shown on the first picture.
Other extensions was planned, but I never for around to making them!
Top and bottom was printed in Prusa Orange PETG.
Dry palette printed in Ploymaker Polysmooth, and smoothened using isopropanol, to minimize layer lines.
Print is paused at layer 47 (9.4mm) to insert magnets.
If you have a Prusa machine, used the Layer color change feature :)
A total of 92 magnets was used.