Modular Wet Palette
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€6.33 – €7.74 net (excluding VAT)
For file: wet-palette-v2-insert-1-3_0.2mm_PETG_MK3S_6h39m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €7.04 excluding VAT (range midpoint).
- Weight reported by the author
- 103 g
- Print time reported by the author
- 6.65 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Modular Wet Palette with brush storage and dry palette
- Rating
- 0 / 5
- Likes
- 146
- Downloads
- 359
- Makes
- 0
- Views
- 4,828
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Characters & Monsters
- License
- Creative Commons — Attribution — Noncommercial
Modular 3D Printed Wet Palette with brush storage and dry palette.
Demo video: youtu.be/iYq_sJFmXDk
Outer Dimensions: 230mm x 200mm
Magnets: 92pcs. 5mm Diameter 2mm Thickness
Sponge/Paper: 200mm x 140mm
The magnets on the side are optional and used for optional extensions.
Currently the lid will magnetise to the bottom when laid as shown on the first picture.
Other extensions was planned, but I never for around to making them!
Top and bottom was printed in Prusa Orange PETG.
Dry palette printed in Ploymaker Polysmooth, and smoothened using isopropanol, to minimize layer lines.
Print is paused at layer 47 (9.4mm) to insert magnets.
If you have a Prusa machine, used the Layer color change feature :)
A total of 92 magnets was used.