Wall Box Camera Junction Box for Avigilon H3 Bullet Camera
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Second hand avigilon camera neeeded a wall box to protect the cables and stop water entry from behind.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 376
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Needed a wall box for new (used) camera avigilon 2.0-h3-d which needed some protection for the inline connectors and the original ones are very expensive and in short supply.
Using a photo of the rubber seal plate I created the base, you need long screws to attach both the camera to the box and the surface, plenty of drain holes in case any liquid does manage to get inside.
Two depths, 30mm should be fine for most, the bottom connector allows a standard rj45 connector to be pushed in, I did plan for a conduit fixing but removed it.