1 / 3
KNOBMI! Sovol SV06 PLUS Y belt tensioning system with Knomi — zdjęcie 1
1 / 3

KNOBMI! Sovol SV06 PLUS Y belt tensioning system with Knomi

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Enhance your SV06 PLUS with the KNOBMI, integrating the BTT Knomi V2 Display into the Y-belt tensioning system

Ocena
5 / 5
Polubienia
11
Pobrania
32
Wydruki
1
Wyświetlenia
457
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Later Edit 28. November 2024

thanks to our member SparksOnTap88 we have modified the Knob and the Knomi holder. made them a little bit smaller in some cases the bed was heating them 

 

This mod integrates the BigTreeTech Knomi V2 Display into the Y-axis belt tensioning system of the Sovol SV06 3D printer, combining functionality and aesthetics. The display is seamlessly housed within a custom-designed tensioning knob, ensuring easy access while maintaining precise belt adjustments.

Features:

  • Integrated Display: The BTT Knomi V2 Display is centrally positioned within the Y tensioning knob.
  • Secure Mounting: Includes a custom holder for securing the antenna and display frame to the printer.

Requirements:

Hardware:

Power: Connect the display to the motherboard using 5V and GND.

Print Settings:

  • Layer Height: 0.2mm
  • Infill: 15-20%, Gyroid pattern
  • Walls:
    • Pulley holder: 5 walls
    • Other components: 3 walls
  • Top/Bottom Layers: 5 each

Notes:

The provided STL files are pre-oriented and ready for printing. Follow the picture in the repository for antenna and holder placement guidance. 

For the SV06Ace use this model
For the SV06  use this model 

Tagi