QMX Cover and Stand Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple and easy-to-print stand which doubles as a cover for the QRP Labs QMX 5-BAND 5W transceiver.
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 355
- Wydruki
- 2
- Wyświetlenia
- 1580
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
After making the original, I was unhappy with the lack of structure to prevent the QMX from sliding out of the cover, so I tweaked the design a bit to add gussets on the end and increase clamping force which prevents the QMX from sliding around or falling out of the cover. You may need to scale the width up by 1% if you find it it too tight due to slight variations in the build dimensions of the QMX as well as dimensional accuracy of your printer - In my case I have not needed to make any adjustments and the radio fits tightly in the case.
Printed with PETG-CF with stock profile in Creality Print on a K1C.
No support or brim required in most cases when printed stood on its end - see image demonstrating correct orientation.
I use bed weld for bed adhesion. If the overhangs are an issue, turn on supports.
30% Lightning Infill
4 Top Layers
4 Bottom Layers
QRP Labs Url: https://qrp-labs.com/qmx.html