QMX Cover and Stand Remix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple and easy-to-print stand which doubles as a cover for the QRP Labs QMX 5-BAND 5W transceiver.
- Rating
- 5 / 5
- Likes
- 30
- Downloads
- 358
- Makes
- 2
- Views
- 1,604
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
After making the original, I was unhappy with the lack of structure to prevent the QMX from sliding out of the cover, so I tweaked the design a bit to add gussets on the end and increase clamping force which prevents the QMX from sliding around or falling out of the cover. You may need to scale the width up by 1% if you find it it too tight due to slight variations in the build dimensions of the QMX as well as dimensional accuracy of your printer - In my case I have not needed to make any adjustments and the radio fits tightly in the case.
Printed with PETG-CF with stock profile in Creality Print on a K1C.
No support or brim required in most cases when printed stood on its end - see image demonstrating correct orientation.
I use bed weld for bed adhesion. If the overhangs are an issue, turn on supports.
30% Lightning Infill
4 Top Layers
4 Bottom Layers
QRP Labs Url: https://qrp-labs.com/qmx.html