1 / 11
XenoSix Toolhead for the SV06 and SV06 Plus On Steroids project! — zdjęcie 1
1 / 11

XenoSix Toolhead for the SV06 and SV06 Plus On Steroids project!

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This toolhead can be used on any SV06 model or 3D printer that uses a similar gantry style

Ocena
0 / 5
Polubienia
41
Pobrania
123
Wydruki
0
Wyświetlenia
1938
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

XenoSix is a high-performance toolhead specifically engineered for the SV06 on Steroids project, delivering exceptional 3D printing capabilities with innovative features and precision design. While inspired by the SV06 ACE for its webcam placement, XenoSix introduces a completely unique approach with improved tolerances, refined cable management, and practical enhancements tailored for optimal usability. 

Every component is pre-oriented in the slicer, ensuring effortless printing and assembly, saving you valuable time and effort.

Note: The XenoSix toolhead is compatible with any SV06 model or 3D printer that uses a similar gantry style. For use with the SV06 Plus, please download the proper X carriage, to accommodate the bigger bearings for the bigger linear rods, from the dedicated repository.

In this repository you will find only the toolhead. The SV06 on Steroids it will be divided on multiple repositories to suite all your needs. 

Key Features and Enhancements

Enhanced Tolerances

  • Fine-tuned for precise fit and performance, reducing assembly hassle.

Streamlined Cable Management

  • Integrated behind 6x3 N52 neodymium magnets for pogo-pin-like connections.
  • Detachable toolhead face for LEDs and part cooling fans with no wire entanglement.

Upgraded Cooling

  • 3010 Fan replaces 3007, improving cooling for electronics and stepper motors.
  • Easier sourcing of components with enhanced efficiency.

Magnetic Attachments

  • Eight magnets for the toolhead and eight for Klicky integration for secure, quick assembly.

Strain Reliefs

  • Better cable strain management, enhancing durability and reducing wear.

Bill of Materials (BOM)

Hardware

Screws

  • 4 × M3x5
  • 5 × M3x6
  • 2 × M3x8
  • 3 × M3x14
  • 2 × M3x20
  • 6 × M3x25
  • 5 × M3x35
  • 2 x M2 self taping screws x10

Heat Set Inserts

  • 30 × M3 (4.5mm OD × 4mm long)
  • 2    x M3 (4.5mm OD x 3mm long) to secure the sun gear to the holder

Magnets

  • 12 × 6x3 N52 neodymium magnets toolhead
  •   8 x 6x3 N52 neodymium magnets klicky

Electronics

  • 1 × 3010 GDS Time Fan (12,000 RPM)
  • 2 × 4010 GDS Time Blower Fans (12,000 RPM, dual ball bearing recommended)
  • 2 × Neopixel LED Lights (Addressable WRGB/RGB/RGBW/WWRGB LEDs)

Hotend Components

  • 1 × BiMetal Heat Break
  • 1 × T-Volcano Heat Block
  • 1 × Volcano CHT Nozzle
  • 1 × 65W Heater Cartridge (or higher)
  • 1 × Thermistor Cartridge for V6 Volcano Heater Block (3x15 PT100 style)
  • 1 × Nema 14 Pancake Stepper Motor
  • 1 × 30mm PTFE Tube (1.9mm ID × 4mm OD)
  • 2 × Round PCB LED (WRGB, RGB, RGBW, WWRGB, etc.)

3D Printing Specifications

  • Material Recommendations: Use durable filaments like ABS, ASA for heat resistance and longevity.
  • Layer Height: 0.2mm for detailed resolution.
  • Infill Density: 30-40% (Gyroid or Cubic for strength).
  • Supports: Use supports for overhangs where necessary, 
  • Print Orientation:
    All parts are pre-oriented in the slicer, ensuring optimal strength and minimal warping during printing.

Pre-Assembled Components and Notes

  • Compatibility: Designed for use with BTT EBB 42/36 Tool Head Can Boards for streamlined integration.
  • Cooling System: Improved with readily available 3010 fan for better accessibility and performance.
  • Modular Design: Quick and tool-less access to LEDs and part cooling fans via magnetic cable management system.

Additional Resources

Links to purchase recommended components:

 

 

 

Tagi