Aqara Humidity Temperature Pressure T1 senor weather cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Wstępna wycena dla PETG
5,46 € – 6,67 € netto (bez VAT)
Dla pliku: Aqara_T1_weather_housing_0.2mm_PETG_MK3S_6h50m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 6,06 € netto (środek widełek).
- Masa podana przez autora
- 64 g
- Czas druku podany przez autora
- 6,84 godz.
- Materiał u źródła
- PET
- Materiał wyceny
- PETG
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Aqara HTP T1 senor weather cover. For using your sensor outside protect for most weather conditions.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 83
- Wydruki
- 0
- Wyświetlenia
- 653
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Aqara T1 sensor in a nice housing, protection against almost all weather types. Easy maintenance by unscrewing the T1 holder to replace a battery for example.
Printing, I used organic supports, overhang threshold at 30 degrees.
Used inserts are M3 x Diameter 4.6mm x Length 3.0mm. 2x M3 bolts to fasten the T1 holder in the housing.
Use 2x 3 mm screws to mount to the wall.
I should use white color, but I hoped red would go along with the bricks, that was a mistake, but it hangs in the shadows so no influence of the sun is my excuse now.