1 / 6
Anti-slip feet for IKEA Stool Marius with rubber insert
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Chair foot is adjusted to a standard 20mm (19.35mm) steel leg, e.g. IKEA MARIUS stool. The foot has a flat hole that…
- Ocena
- 4 / 5
- Polubienia
- 4
- Pobrania
- 27
- Wydruki
- 1
- Wyświetlenia
- 183
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Chair foot is adjusted to a standard 20mm (19.35mm) steel leg, e.g. IKEA MARIUS stool. The foot has a flat hole that fits to standard rubber anti-slip pads. The hole has three protruding grooves to press the foot against the leg. No supporting structure needed. G-code is optimized for PRUSA i3 MK3. No post-printing needed. Anti-slip rubber-pad should best have a diameter of 10.4mm (or smaller), what is standard in do-it hobby shops.
Category: Replacement Parts