Pixels to Prototype Dust Boot Adapters - Sizes from 1.25" to 4" !
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
All different types of adapters for the Pixels to Prototype Dust Boots!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 208
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
All sorts of adapters for your Pixels to Prototype Dust Boots! If you want to upgrade from a shopvac to a dust collector for your CNC – no need to replace your boot - just print a new adapter! These adapters are also available through my site: www.pixelstoprototype.com
Adapters:
- 1.25"OD Adapter - Outside is tapered from 1.21" (30.75mm) to 1.25" (31.75mm) for connection. Designed for the hose to go over the end and be clamped via ziptie. This is designed for a 1.25" plastic ShopVac-type hose.
- 1.5"ID Adapter - Adapter OD fits the Rockler Dust Collection FlexiPort 1.5" ID
- 1.75"OD Adapter - Adapter ID is Tapered from (45.45mm) to (44.59mm). OD of adapter is (52.45mm). Designed for the hose to fit inside the adapter. This fits hoses just like the XCarve Dust Shoe and was made as a direct replacement for an Xcarve shoe.
- 2.25"OD Adapter - Adapter ID is Tapered from (58.15mm) to (57.25mm). OD of adapter is (65.15mm). Designed for the hose to fit inside the adapter. This is designed for a 2.25" plastic ShopVac-type hose.
- 2.5"OD Adapter - Adapter ID is (52.325mm). OD of adapter is (60.325mm). Designed for a Dust Collection 2.5" Hose to be clamped on the outside of the adapter.
- 3"OD Adapter - Adapter for 3" Dust Collector Hose
- 4"OD Adapter - Adapter for 4" Dust Collector Hose
- Custom Adapter - Can be made to any size!
Pixels to Prototype v3 Dust Boot: https://pixelstoprototype.com/products/dust-boot-v3-for-cnc-dust-collection-pixels-to-prototype-customizable-fits-most-cncs