Pixels to Prototype Dust Boot Adapters - Sizes from 1.25" to 4" !
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
All different types of adapters for the Pixels to Prototype Dust Boots!
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 16
- Makes
- 0
- Views
- 208
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
All sorts of adapters for your Pixels to Prototype Dust Boots! If you want to upgrade from a shopvac to a dust collector for your CNC – no need to replace your boot - just print a new adapter! These adapters are also available through my site: www.pixelstoprototype.com
Adapters:
- 1.25"OD Adapter - Outside is tapered from 1.21" (30.75mm) to 1.25" (31.75mm) for connection. Designed for the hose to go over the end and be clamped via ziptie. This is designed for a 1.25" plastic ShopVac-type hose.
- 1.5"ID Adapter - Adapter OD fits the Rockler Dust Collection FlexiPort 1.5" ID
- 1.75"OD Adapter - Adapter ID is Tapered from (45.45mm) to (44.59mm). OD of adapter is (52.45mm). Designed for the hose to fit inside the adapter. This fits hoses just like the XCarve Dust Shoe and was made as a direct replacement for an Xcarve shoe.
- 2.25"OD Adapter - Adapter ID is Tapered from (58.15mm) to (57.25mm). OD of adapter is (65.15mm). Designed for the hose to fit inside the adapter. This is designed for a 2.25" plastic ShopVac-type hose.
- 2.5"OD Adapter - Adapter ID is (52.325mm). OD of adapter is (60.325mm). Designed for a Dust Collection 2.5" Hose to be clamped on the outside of the adapter.
- 3"OD Adapter - Adapter for 3" Dust Collector Hose
- 4"OD Adapter - Adapter for 4" Dust Collector Hose
- Custom Adapter - Can be made to any size!
Pixels to Prototype v3 Dust Boot: https://pixelstoprototype.com/products/dust-boot-v3-for-cnc-dust-collection-pixels-to-prototype-customizable-fits-most-cncs