Counting matching models…
I would like to introduce to you the 5th version of my wind-up boat. After the 4th version i got a lot of feedack on Facebook, which I have implemented as well as possible. As you can see there is a much larger wind-up weel. The boat can…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
clamps the rubber around the Gearstick down
Print approx. €4.29–€5.24 excl. taxPreliminary estimate for one variant
Baloon Boot compatible with building bricks blocks e.g. LEGO If you like it --> press like it :-) nachkonstruiert des models von k-eye mit Änderungen / reconstructed the model from k-eye with changes: - mit höherer Front/higher front -…
This is a small plastic protector for the end of the SRAM X1 mountain bike crankset, to prevent rocks from scratching the bottom of the crank arms. It will probably fit other aluminum SRAM cranks (GX, etc) but I haven't tested that. To…
An enlarged scan of a porcelain boot.
If your broke off and need a replacement, this is the print for you
Boat compatible with building bricks blocks If you like it --> press like it :-) Remix of my balloon boat Printer Brand: Creality Printer: CR10-V2 Rafts: Brim Supports: No Resolution: 0.2 Infill: 10 % Printed: PETG/PLA Weight: approx. 40g…
Capture the magic of your special moments with your stylish photobooth picture frame! Designed to showcase your favorite photobooth prints, this sleek and modern frame adds a touch of elegance to your homedecor. Perfect gift for weddings,…
Here's links to the things I got on amazon to put in the slot at the bottom, and optionally reinforce the screw hole. The screws used were the ones that came with the CNC, but it's a 5mm threaded screw hole in the model, so any m5 should…
Manual transmission shift lever/knob boot retainer or shift shaft boot-to-knob threshold. This provides a flush fit and a smooth transition between the boot and the shift knob. It slides past the threads and is held in place by the taper…
This is designed to be printed with a .6mm, but it might just work with a .4 nozzle.
This pin boot cover is made to fit the Flipper Zero WiFi Dev Board case found at the following locations: https://www.printables.com/model/606858 https://www.thingiverse.com/thing:6090184…
Custom shift boot. has 6 bolt pattern at 2" radius Requires a soft flexible tpe or tpu I needed a shift boot for my project car. The store bought rubber boots have failed on me. So i looked into using a cv boot When I looked it using one…
to be printed on the rifle side without any support.
Suckit dust boot replaceable (3) hole plate
It's helpfull when you need to remove rain boots or any shoes that you just have problem with taking them off. Print: recomend 3 layer wall; I print with 15 % infill; I placed it upsidedpwn to have smooth top layer but with support u can…
I didn't like how the USB-C connector was left to hold its own, so I created a simple reinforcement boot. Best printed in TPU, but I imagine you can do it in another material if you so choose. I also attached the .STEP and .F3D exports so…
TL;DR first: Welcome to my Overhaul of the Creality Ender 2! Im starting here with version V2 (V1 is only in one picture; there was too much wrong with that), which comes in 2 iterations/stages: ++++++++ Stage 1: ++++++++ changing out the…
This is a quick approximation of the parcel shelf clip for a smart ForFour car (2017), I did need to file the inside to fit the threads of the rod it fixes onto, but your mileage may vary!
This is a CV Joint Boot for the front left CV Joint on a Land Rover Range Rover - original part number LR032576 ... works exact the same as the original but for fraction of the costs if made on your 3D printer using TPU
This is a model based on an ski boot canting gauge I found on http://skibootalignment.com/ Info on the KPS Cant Gauge: http://skibootalignment.com/kpsgauge.html How to use: http://skibootalignment.com/page9.html If you are having problems…
This convenient ski boot handle is designed to be easy and quick to print, and allows the user to conveniently carry both ski boots with both hands. It can be printed from PLA as long as an infill of 25% or higher is used. An infill or…
Is your tiny plush friend tired of being cooped up all day during the stormy winter months? Here's a solution to some of their micro problems! These tiny rain boots are designed to fit 20cm dolls though please be aware that your tiny…
Clipper sleeve Boot. another "desktop clipper"sleeve, this time a cool looking boot! easy to find right when needed. easy to print. Happy printing.
A simple boot for Stanley cup for extra protection. Also it makes it more stable. Matches the design Made mine from TPU If my work inspired you, a coffee would make my day. https://buymeacoffee.com/odemir
Photobooth Buzzer A buzzer based on the ESP32. It connects to the photobooth system via bluetooth and emulates a keyboard to trigger captures remotely. Made for the photobooth-app but could be used universal if all you need is a keyboard…
be happy with his boot, never say north atlantic again :DDDDD
VW Up shifter boot trim. Dimensions arent exactly precise but it fits.
this is simple desegin of background for my 3d modelels. i can add some color LED on back to make some effect.
Replacement for the stupidly designed clips used to hold the parcel shelf onto the strings in the boot on the Mk8 Fiesta Ford Part Number 2423830
Schlauchboot Antrieb mit Ackubohrer. Drucken: 1x Gehäuse1 1x Gehäuse2 2x Achse 4x Stift 2x Anschluss3 2x Anschluss2 2x Stange19 2x Stange14 4x Verbindungsstück Kaufen: Gewindestange 1m, M10 Kugellager Aussendurchmesser 26mm 6x Muttern M10…
Simple, yet efficient solution to hard-to-hold boot strap loop. How to print: print the outer shell in flex to keep it soft against the car print the inner part with PETG or other more resillient material
Over time, the rubber feet on the FlashForge CreatorPro start to degrade, leaving black residue all over the place. I designed these foot booties that slip right over the outside of the rubber feet, solving the problem easily. NOTE: These…
Some cheap Amazon 5525 barrel jacks are a little loose on the Pinecil causing a weak connection. This is a boot to help secure the connection. The part is to be printed in TPU. I have found it to work using the following barrel plugs.…
These are sliders made for, well, sliding (and grinding) without ruining the pretty external walls of your lowkey expensive new frames. Moreover, you can make 'em look pretty too! I'm gonna upload the .step files too so you can modify the…
I designed this part to adapt a standard ATV rubber boot on the steering column universal joint of my B9 A5. This joint is a weak component. Printing: PLA 15% infill, .4 nozzle, 3 walls, manual supports on the surfaces shown on the pics.…
Replacement soles for Head Vector XR ski boots (front and rear) Designed to match original geometry and fit standard bindings Easy installation using existing screws Improves grip and protects the boot when walking Print in TPU…
Cursed Gatekeeper Heavy Boots is a free dark fantasy miniature for tabletop games, RPG encounters, DND, TTRPG, wargaming, collectors, and resin printing. The STL file is scaled to 82 mm height and is ready for resin printing. Download…
Cursed Gatekeeper Heavy Boots is a free dark fantasy miniature for tabletop games, RPG encounters, DND, TTRPG, wargaming, collectors, and resin printing. The STL file is scaled to 82 mm height and is ready for resin printing. Download…
only had red in TPU filament... so thats what weve got... This must be made with TPU so it is flexible enough to get over the foot of the side stand.... my side stand has a 15mm shaft ... so I will put in the files a template of it so…
helps you remove snow from your skiing boots INFILL: 80%
This is another version of the Widdle Wadder. It fits 8mm x 2mm rare earth magnets. I made this one a 5-step model and rounded the edges. Printed in PETG with no supports. UPDATE: The magnets were starting to scratch the paint, so I added…
Is your tiny plush friend tired of being cooped up all day during the stormy winter months? Here's a solution to some of their micro problems! These tiny rain boots are designed to fit 20cm dolls though please be aware that your tiny…
This is a model of the upper control arm ball joint boot for the Honda civic EG and Del Sol. I modeled the walls to be 1mm thick and it seems to come out perfect for a boot, if anyone installs it let me know how it holds up. I modeled a…
Some cheap Amazon 5525 barrel jacks are a little loose on the Pinecil causing a weak connection. This is a boot to help secure the connection. The part is to be printed in TPU. I have found it to work using the following barrel plugs.…
small and large telephone booth with lid and insert. Instructions: for large booth don't change the scale and use the regular size box for the insert. for small booth use a scale of 50% and use the mini box for the insert. Printing: print…
This is a dust boot for the ProLight 1000 CNC, it bolts over the front and holds a mist coolant nozzle as well as a light ring. The main flat piece is meant to be steel, it can be plasma cut before being counter bored or countersunk…
A simple BLtouch mount for the ender 5 Corexy mod with a e3d v6 revo hotend
Name's Charlie McGuinness the owner of McGuinty's Crafty Gifts from Weston Super Mare, England UK This is my First Model from Tinkercad of Shadow the Hedgehog/Ultimate Lifeform wearing his new Air Boots from Sonic Boom. I've decided to…
Creation of HDS (not mine) Boat VIIC uboot, following Vom Original zum Modell, Uboottyp VII C de Fritz Köhl, Axel Niestlé. https://forum.freecadweb.org/viewtopic.php?t=27269 .STEP (edit files) added. Category: R/C Vehicles
I designed this part to adapt a standard ATV rubber boot on the steering column universal joint of my B9 A5. This joint is a weak component. Printing: PLA 15% infill, .4 nozzle, 3 walls, manual supports on the surfaces shown on the pics.…
Introducing the Riva Aquarama RC Boat 1:11 Scale 3D Printed Model! This remote-controlled boat captures the elegance of the classic Riva Aquarama with its sleek lines. This model features easy assembly and compatibility with a variety of…
Yes, this model was made using AI, please don't review bomb just because the model was made using AI. If you have a genuine concern please print the model before leaving a bad review or let me know in the comments. You can block AI models…
Lucky 7inch by clover fpv. Bando boot ready for banger Fits 2808 and less
I made a design using Nomad Sculpt of a panda butt for my friend as her logo. I liked the design so I uploaded it.
Full Image Catalog The complete gallery of my works can be found at Portfolio. You can search by the file’s reference number or simply click the preview image to open it directly. This Puss in Boots model features the agile feline with…
A simple tool to tighten up the boot / bushing of Neutrik XX series connectors.A simple tool to tighten up the boot / bushing of Neutrik XX series connectors.
Replacement sole pad for the Nordica B7 ski boots. Added also Fusion360 source file, if you would need to adapt a little bit… Print Settings Printer Brand: Prusa Printer: Mk2.5s Rafts: No Supports: Yes Resolution: 0.2 Infill: 40%…
I don't use the built in hanger for my charge cable on the level 2 charger because it sticks out from the wall and is too easy to bump into and break the charger. So I made a light cover (see other models) and a dust boot to protect the…
Frame sostitutivo per la cuffia della leva del cambio della Fiat Panda 141. Stampare in Petg o altri materiali resistenti al calore. Assolutamente sconsigliato stampare in PLA. 3D printable replacement frame for the Fiat Panda 141 gear…
Fits 38mm carburetors, printed in TPU 100% infill, I recommend to use gasket maker on it and also to put metal bracket between mounting pad and bolts so it won't flex when bolted on (this flexing can be seen on picture). Edit: I put 5mm…
Avocado Boot for 4x or 2x avocado seeds. I used the design from @FireDragon3D as reference! I design it to fit into Propagation boxes .
This convenient ski boot handle is designed to be easy and quick to print, and allows the user to conveniently carry both ski boots with both hands. It can be printed from PLA as long as an infill of 25% or higher is used. An infill or…
Paint and print using the AMS of your choice, or manually switch filament at different heights if you don’t have an AMS.
I wanted a boot dryer, but I never felt like spending $50+ on a thing that works, but will probably suck up a bunch of floor detritus and fall over because my boots weigh more than it does. I wear 10" steel-toe boots, and almost never…
Just print in TPU, No support needed. If you want, You can add a stop to the print and change color to black, To make a stripe that will help you distinguish between salt and pepper. Please let me know how you enjoyed it or if printing…
Material: 110 g TPU A95 Druckereinstellung: Layerhöhe 0,2 / Infill 90 % honeycomb / Wände 4 / Schichten 5 oben, 5 unten / with Support Gutes Gelingen und über ein Like würde ich mich freuen. Good luck and I would be happy about a like.
These are boots for a flat footed barbie. Does not fit the standard high heeled version. Print in flexible material such as 95a TPU. Also check out my other flat foot Barbie shoes
Description 🔒 Copyright & License Notice This model is protected by copyright. If you want to use it commercially or support further development, please check the paid subscription here: 👉 https://www.patreon.com/cw/Nieuchronny 🟡 Yellow…
I built an airbrush spray booth using white cardboard sheets. I designed this air filter to pair with a computer fan to exhaust the paint fumes.
A fun platform-boot organizer with a bold winged-heart emblem and decorative fashion details. Designed to keep items upright while adding a dramatic, romantic accent to a desk or vanity.
A tall platform-boot desk organizer that turns storage into décor. Lace-inspired textures and charm-style details make it a cute statement piece for pens, pencils, tools, or vanity items.
Material: TPU A95 Druckereinstellung: Layerhöhe 0,2 / Infill 60 % honeycomb / Wände 4 / Schichten 5 oben, 5 unten / with Support Gutes Gelingen und über ein Like würde ich mich freuen. Good luck and I would be happy about a like.
🌸 Floral Boot Vase – Modern Whimsical Decor 🌸 Turn heads and spark conversations with this Floral Boot Vase , a unique blend of modern design and playful charm. Inspired by a stylish heeled boot silhouette, this vase transforms an…
I wasn’t happy with the airbrush booths on the market, so I decided to make my own. What I wanted was a multipurpose ventilated work booth where I can both build models or solder without worry of fumes, while being able to quickly switch…
I hav made a pair of boots from the game Kingdom come with help of ai. You can hold two Phillip one blades with these shoes.
Simple, yet efficient solution to hard-to-hold boot strap loop. How to print: print the outer shell in flex to keep it soft against the car print the inner part with PETG or other more resillient material
Tire mold for silicone tires for boots loader. Two parts mold. Made it a tight fit when going together to hold it. Want to use a tear resistant silicone. Have to twist the mold half's to get the tire out. Pics to help see how its done.…
My Owala was dropped and dented on the edge so it did not sit flat. The rocking drove me crazy so I knew I needed to do something, either throw away the bottle or fix it. 3D printer to the rescue! I copied the dimensions provided in the…
Leak-proof bottle boot that is for a 24 oz bottle great part or upgrade for your bottle.
Step into the spirit of the season with this detailed Santa Claus Boot model. Inspired by the iconic footwear of the legendary gift-bringer, this sculpt features a tall red boot design complete with textured leather surface, sturdy…
It was meant for this one issue with snow getting stuck to the bottom of my ski boots so I couldn't clip in and I was really imagining this tool so I made it. lol funny how that works probably could be used for tons of other stuff, if you…
Photobooth Remote Case Holes for Qanba Gravity KS buttons 30 mm and 6.5 mm (rotary encoder) 2 parts for the upper housing: one for HW040 02.03.2026: holder added
Защитный бампер для мультиметра ZOYI ZT-102A и его аналогов. Есть отверствие для использования с "велкро-липучкой" на руку. Печать TPU. В загруженном файле, добавлена защита по всему периметру.
Please note that this design has not yet been physically printed or tested. If you decide to print it, feedback is highly appreciated. Feel free to share any issues, fitment problems, or improvement suggestions so the design can be…
This is a CV Joint Boot for the front left CV Joint on a Land Rover Range Rover - original part number LR032576 ... works exact the same as the original but for fraction of the costs if made on your 3D printer using TPU
Tired of stinky boots after surfing? This is the solution I found. I hope you like it too. Note that I made some improvements to the shared model, after I did print it's first version, in the picture.
Toyota Avensis T25 – Trunk Shopping Bag Hook (Replacement Part) This is a practical shopping bag hook designed as a rep
only had red in TPU filament... so thats what weve got... This must be made with TPU so it is flexible enough to get over the foot of the side stand.... my side stand has a 15mm shaft ... so I will put in the files a template of it so…
VW Up shifter boot trim. Dimensions arent exactly precise but it fits.
My bootleg Kasane Teto figurine came with a missing shoelace piece. I decided to recreate this missing piece from scratch. This model is rather rough, however it looks good enough from a distance. Printed with stock 0.4mm nozzle using…
The embossed version of the boot has a smiley face texture. The smooth one is well... smooth. It won't work with rigid materials unless the model is altered because it has a 0.5mm interference fit. Recommended print settings: material:…
![Sliders for Endless UFS 90mm frame [FruitBoot Brand]](https://media.printables.com/media/prints/1108459/images/8377184_36ecd31f-d064-49da-83d1-82e7a25fa198_7893f05a-5238-49cb-bcad-fac70db33bac/20241215_011822.jpg)
