Charge Point Cable boot - covers the end of standard Charge-Point charging cable
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dust boot to cover end of charger cable when not in use. Fits most level 2 home chargers (not Tesla)
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 5
- Makes
- 0
- Views
- 85
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Noncommercial
I don't use the built in hanger for my charge cable on the level 2 charger because it sticks out from the wall and is too easy to bump into and break the charger. So I made a light cover (see other models) and a dust boot to protect the ends of the charge cable when not in use. Here is the dust cover.
Print this in a soft flex material. Shore 85 A to shore 95A will do nicely. Any color will do.
The design is meant to use a piece of string or cord to tie onto the dust boot (thread it through the obvious hole) and then loop a few times the other end around the charging cord and tie it off. When ready to charge, remove the boot. If it's nice and soft it won't scratch your car. I used Ninjaflex (shore 85a) and the whole thing is a soft rubbery feel. The flex of the flexible material makes it grip the charge cord end when not in use.
No supports required. Easy-TPU, so to speak. Printed this on a MK4S because there is no bowden tube to foul up the TPU printing.