Balloon Boot compatible with building bricks blocks e.g. LEGO
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Balloon Boat compatible with building bricks blocks e.g. LEG nachkonstruiert mit Änderungen / reconstructed with changes
- Rating
- 4.684 / 5
- Likes
- 78
- Downloads
- 753
- Makes
- 17
- Views
- 2,536
- Reviews
- 19
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Baloon Boot compatible with building bricks blocks e.g. LEGO
If you like it --> press like it :-)
nachkonstruiert des models von k-eye mit Änderungen / reconstructed the model from k-eye with changes:
- mit höherer Front/higher front
- mit flacherem Boden / lower bottom thickness
- größerem Kanal für die Luft / increased air channel
- Löcher für Filament, damit der Ballon stehen bleibt / holes for filament that the baloon get more stable
Printer Brand: Creality
Printer: CR10-V2
Rafts: Brim
Supports: No
Resolution: 0.2
Infill: 10 %
Printed: PETG/PLA
Weight: approx. 53g (at 5 wall lines)
Filament length: ca. 18m
Filament change at 13,8mm (Samples on pics)