Counting matching models…
Realistic old style boat with paddles - easy to print and assamble. For assemble you need just some glue you are comfortable with. Supports are needed just on flat base ring where floor sits and that's it. You can tweak weight…
Printed these upside down using 0.4 mm nozzle with PETG and PLA. The (TPU) seal goes in the lid. Use a 5" hole saw to install. Added cover with webbing for installation require higher weight load. Added blank cover with no finger holds.
For 3D printing nerds, hobbyists, and modern naval enthusiasts alike! The result of a quick weekend project, this model was inspired by the famous 3D Benchy, along with a fun facebook game from my childhood. The Aquitaine class is the…
Based on the 1803 spec, Master Shipwright Henry Peake, and the boat on display with HMS Victory: https://commons.wikimedia.org/wiki/File:23_ft_Yawl_RMG_J0801.png Benches are a standard part but can either be cut or reduced in length in…
My students and I created these files for a STEM boat-building challenge. Students first tested their boats to see how much weight they could hold. Next, we placed the boats in choppy waters. Finally, we hot-glued the mast attachments and…
Remeshed for a friend as it was crashing Prusa Slicer. Too many manifold edges in the original
RC Sailboat based off of the Volvo Open 70 Groupama 4 Model is 1m long It requires a minimum 3 channel radio to be able to control the sails, Keel and the rudder. It can be built as a 2 channel model as well with a fixed keel. Bill of…
There are two options… Option 1: Steamboat with Funnels - Single colour print (Paddles printed separately). Option 2: Steamboat without Funnels - Print the Funnels separately in black! Printing The Steamboat does not require supports.…
A deck for a sailing boat in DnD. I made it to use as little space as possible, while still keeping some level of detail. The grid is 25mm/1 inch. The ramp includes an hole to fit a magnet of 10x2mm, so mini's with magnetic bases are able…
A deck for a smaller sailing boat in DnD. I made it to use as little space as possible, while still keeping some level of detail. The grid is 25mm/1 inch. The larger model can be found within my boat collection. The ramp includes an hole…
A deck for a keelboat in DnD. I made it to use as little space as possible, while still keeping some level of detail. The grid is 25mm/1 inch. It is FDM friendly. I printed it with an Ender V3 KE. I made some other boats in the same style…
A deck for a rowboat in DnD. I made it to use as little space as possible, while still keeping some level of detail. The grid is 25mm/1 inch. It is FDM friendly. I printed it with an Ender V3 KE. I made some other boats in the same style…
Two types of masts for the different boats I made. These are are for the boats which use a 25 mm/1 inch grid. The first one is more stable, the other takes up less space.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 127x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Grey PLA+ Sunlu Red PLA+ Sunlu White This print uses 4 unique filaments Swap…
3003 Fantasy Bits Mega STL Collection on Kickstarter Here’s the updated version with the correct Patreon link: 🔥 Want to stand out in the 3D printing market and attract more customers? 🔥 Now’s your chance to sell unique, stylish, and…
One of the most frustrating challenges of being on a rowing team is dealing with equipment failure. Parts can be expensive, hard to source, and often proprietary, meaning you're forced to buy replacements from specific manufacturers.…
During transport and handling, the propeller blades of the BlueRobotics BlueBoat are exposed and prone to bumping with other objects. The Propeller Blades Protector provide a hard cover/shield for the blades thereby reducing risk of…
This is a 3D scan of the sculpture "Argonauta" created by Spanish artist and sculptor Amancio González in 2012. It depicts a contemplative figure seated in a paper boat , symbolizing vulnerability, journey, and introspection. 🛶 The design…
Sailwinch Servo Drum 40mm ready to run on a Basic Futaba disk Horn of 20mm single track. 40MM DIAMETER, I will setup for a 10 Turn Servo. M3 servo drum lock M2.5 Horn lock This a remix of https://www.thingiverse.com/thing:2583624 Ready to…
This is a Lead Bulb Mold for Marblehead Class RC. The Ballast is divided in 4th pieces, symmetrically. The overall lenght is 350mm, and the weight is something near between 3000-3300Kg. The halves were divided in the center of mass of the…
Would you like to support my work? :) Check out my full catalog with exclusives, early access and commercial licences. — A boaty-looking citrus juicer with two spouts. One with a separator for seeds and pulp and one without. The spouts…
Find 3D-Printed RC cars here.
Find 3D-Printed RC cars here.
The mesh pontoon trash and pop can bag inserts were weakening and falling apart over the last year, so we dropped in a quick print to keep the bag structure and allow for continuous use - all year long! Printed 15% infill, Overture PETG…
This a cover for the 3mm adjuster nut used on IOM sailboat shrouds. This allows you to use your fingers instead of a tool for changing the location. It can be used for other sailboats and many other things as well. It is designed to fit a…
We are currently developing a model of a fishing carp boat. If you are interested in it, please let me know, and I will speed up the process. The description will be updated with all the necessary materials and components required to…
print at own risk still being prototyped https://amzn.to/4n02CMb https://amzn.to/3HObqWC https://amzn.to/4mBhNfb https://amzn.to/4mKCdlR
This Benchy isn’t a boat. It’s a plastic epic. Inspired by Homer’s Odyssey , it’s the ship of Odysseus—the most stubborn hero in literature—who took twenty years to get home and picked a fight with nearly every mythological creature along…
This paddle holder is custom-designed to fit the IKEA SKÅDIS pegboard system and securely hold dragon boat paddles. It prints easily in PLA or PETG with no supports required, making it a quick and efficient solution for organizing your…
It looks like youll need a little bit of supports around the edge other than that your good.
I didnt know where to place my Garmin watch when rowing, so I made myself one, made another one for the normal thing for boots
Introducing…….AIRBOOGIE!!!! This is a remote control swamp boat/airboat, designed around a boogie board. After an initial test run I have made the following changes to the design : Additional clearance for the propeller on the cowl…
Here you can print and assemble a grate fishing bait boat. This filles contain all printed parts models, main code and other files, for full assembly you need to buy additional parts. In my example i use a ESP 32 cip, and a custom board…
👍 Don't forget to Like and Collect this, so you can easily find it later! ⭐ If you like my models and that I make random minis for people then come follow and support me on Patreon…
Dashboard for my boat. Probably not very useful BUT the holes are perfectly sized for marine rocker switches, breakers, and the cigarette lighter/usb/voltmeter I had lying around. They were on a generic rocker panel I had bought off…
This 3D-printable tackle box storage system is designed to securely hold one Plano 3731 or Plano 3730 tackle box in small boats, jon boats, kayaks, and compact fishing setups that don’t have factory storage. The holder includes multiple…
Bashtech JetBoat - APEX 6S EDITION Français en dessous !!! This model is a complete overhaul (Remix) of the original Bashtech design. 🎥 See the boat in action: 🛠 Technical Upgrades 6S Power System: Enlarged motor mount to fit 36XX…
I got tired of making parts for this kit so I'm doing some CAD and printing a few of the big ones to save time and get them looking better. I printed these using in gray filament from Bambu. 15% fill, tree support. --3" Gun Turret: I made…
This is a set of sailmaking blocks based on Swede Johnson's designs. I have several formats available, even a photocopy of the original drawings and instructions. I have his original drawings, but using modern CAD software, I faired his…
PC case fans are great for indoor ventilation applications in boats and campers. They run on 12 volt, you can get a super quiet one, and also get a cheap speed controller for them. All you need is this cover. This design is easy to print,…
Wanted a spare RC Masthead Wind Indicator. 1.5mm SS rod, K&S #5126 3/32" brass tube, lead fishing weight, 3D printed vane, 4mm SS bead w/ 1.5 mm hole, 22 gauge wire insulation, super glue and silver solder.
It is a Benchy Boat that has a Lego brick inside of it which lets it connect to Lego bricks.
This model is for people that want something a little different. It is designed so can have something cool to show off.
Viking Inland Boat, generated with ai but mesh was cleaned by me in blender.
The inner width of the boat is 45.5 mm, which just fits the cards of the Czech edition of the game for storage. If you like to store the cards in the boats, make sure your card size will fit or scale the model accordingly. Prints easily…
Inspired by Felix’s actually floating benchy attachment, I thought it would only be right to make a Boaty actually float too. The front of the bench should be facing the same way the arrows are. I made the back float slightly larger to…
I created this model to make the gameplay more intuitive and to help players who have limited table space. The idea is to create a ship that contains all the information necessary for the game, so players don’t have to first check the…
made to go whith risk as an expanson don't have rules so you can make your own. it can also be used as a little toy cargo boat. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: No Resolution: 0.16…
Cute Zombie Couple on a Boat Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d ) More of this kind of work here; https://www.printables.com/@StudioMechanik/collections/2866688
Stylized haunted pirate version of a classic benchmark boat design, featuring ghost sails, skull accents, and flowing sp
2004 Matsudaverse Batboat STL attached if you wish to try a different print orientation without cutting the model. Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d )
Bat boat (2004 Matsu averse) 5 Different Iterations of the Bat Boat
ship with mini people, and I tried it so it will float. Enjoy :D
This model is compatible with the lego system.
Given the exposure to higher temperatures and the environment I used ABS for these parts. Tower prints better standing up with tree supports. The radar will not be joined in order o facilitate the placement of any brand logos (easily…
Here's my first attempt at making a boat for the kids to play with. Dual purpose, bath toy and outside spring breakup creek runner !! :-) Original 75mm long Scaled up 150% version is 118mm long
Model assembly might be marginally difficult, super glue is required.Certain parts are designed to bend a bit before they fit into place (e.g. the top tabs on the front and back rigging are supposed to bend outwards and go inside of the…
A battered and timeworn wooden rowboat hull, perfect for bringing coastal, riverbank, or dockside scenes to life. The warped planks, exposed ribs, and worn interior seating evoke years of hard travel across rough waters before finally…
Bring authentic maritime character to your scene with this Classic Wooden Rowboat model. Sculpted with layered plank detailing, reinforced ribs, and subtle surface wear, this small vessel captures the timeless simplicity of traditional…
Boat fender clip for hanging a fender on the guard rail (25 mm or 1 inch pipe). Remember to tie a knot on the line after you thread it through the hole. Category: Sport & Outdoors
This model is compatible with the lego system.
Mast collar for 2.4mR saliboat. Used on Norlin MKIII builds from Charger. One late 90s one 2009 build. Printed on BambuLab P2S with PETG.
Print as oriented 0.4mm nozzle, 0.2mm layer, tree supports, PLA. About 1 hour print time. Added 1/15 hull half. print 2 times the same part and glue together for the whole boat.
No supports needed in the provided orientation. Parts’ suggested colors are in the file names. For assembly some light sanding, glue and, clamping work well. I would not recommend gluing the peg in place, it’s the most likely part to…
Mount stuff on the handrails. For 25 mm/ 1 inch pipe (print the correct version). A cup holder is included, so you can see how it is used. Choose cup holder for vertical or horizontal mounting. You could also integrate the inner part…
A fully 3D printed RC harbour tug with a working azimuth stern drive. The two pods rotate 360°, giving it the same rudderless maneuverability as a real ASD tug — spinning on the spot, crabbing sideways, and full thrust in any direction.…
Support pour Moteur 20GA130-60-12v pour bâteau RC. Le pdf contient le lien Tinkercad.
Hello everybody. I created this simple and easy to print base for Dyson Car+boat. You can also integrate in the power cable so whenever you place the dyson in it gets charged. No supports needed for print. I printed from PETG with 0,15…
OD.50mm X ID.43mm X L.250mm I designed and printed these flush mount rod holders specifically for my boat using ASA-CF. I wanted something stronger and more durable than the cheap plastic ones you typically find, especially something that…
Have you every wanted to sit on a nautical themed boaty just relaxing as you shoot mortars out into the bay? Well ask no more, now you can! Category: 3D Printing Tests
A customer had a dashboard panel that was in poor shape so he took it off and sent it to me. I duplicated it and printed him a few to fix the problem. This is the dashboard panel or the master power switch on a Nitro bass boat. In the…
Old fisherman in a boat with a tattered sail Category: People
CatamaPlane a Catamaran Seaplane Inspired by 1927 Savoi-Marchetti S.55 CatamanPlane4 is current version. I had trouble printing when scaled to 1/2 size so I increased wing thickness in some places. Added pins to elevate the fill to be…
