Waste oil container Kit Card - 1:24 scale garage diorama accessories
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print your accessories for an oil change! No supports needed.
- Ocena
- 0 / 5
- Polubienia
- 157
- Pobrania
- 782
- Wydruki
- 0
- Wyświetlenia
- 1412
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Summary
This is a 1:24 scale model of a waste oil collection container in a kit card style.
Versions
The complete set is available in a 3MF file for a one-color print.
There is a 3MF-file with predefined colors intended for users of AMS or MMU.
Print
Print with 0.12 layer hight or lower to bring up the details.
No supports are needed.
Use 3 perimeters and 15% infill.
Post processing
The small struts can be removed really quickly and cleanly using a side cutter.
Please remove the predesigned supports under the trolley to fit the oil barrel.
Assembly
The kit is easy to assemble. All parts fit together very well. If a part should be loose, superglue can be used.
Dimensions at 100% scale (1:24)
The fully assembled model has the following dimensions
Height: 71mm
Depth: 32.7mm
Width: 21mm
The kit card has the following dimensions when printed
Height: 41mm
Depth: 54.5mm
Width: 53.2mm
Scaling will work in a low range due to the tolerances.
Other models
I will also try to publish other car related garage / diorama models. Stay tuned!
I hope you had as much fun printing and assembling it as I did :-)
Do you like my work? I would be very happy if you would support my work on Ko-fi.