Voron V0/V0.1/V0.2 Compact Handles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minimalist handles for the Voron V0/V0.1/V0.2 (for 3mm panels, see remix for 2.5mm). STEP file provided.
- Ocena
- 4,957 / 5
- Polubienia
- 157
- Pobrania
- 1036
- Wydruki
- 32
- Wyświetlenia
- 4925
- Oceny
- 23
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Voron V0 sure is small but it is still a bit of a pain to carry and move around.
Here're some minimalist handles which do not require any new nuts to be installed nor anything to be taken apart. They've been designed to work with zruncho's No Drop Nuts. They will of course also work with a normal nut.
They're for the Voron V0/0.1 (3mm panels).
Update: Remix for 2.5mm panels by Spacekoaster
Update: Remix for 2mm panels by Josten7
STEP file provided if you'd like to tweak them (i.e. for other panels size)
If you enjoy or find this model useful please make sure to click the Like button. Thank you!
Below the requirements and settings, they are from the Voron Manual, a bit overkill for those handles but at least you can't go wrong with that:
- Need: 2x M3x10 BHCS (Button Head Cap Screws)
- Material: ABS recommended
- Layer height: 0.2mm
- Infill: 40%
- Perimeter: 4
- Top/Bottom Layer: 5
Print as suggested below, they should be plenty strong.
My original repository commit here: https://github.com/loicloic/VoronUsers/tree/master/printer_mods/loicloic/V0.1_Handles
Be sure to check my other models.