Print in Place Hard Shell Magnetic Glasses Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A hard shell glasses case that uses print in place hinges and neodymium magnets to index the two halves and stay closed.
- Ocena
- 4 / 5
- Polubienia
- 21
- Pobrania
- 96
- Wydruki
- 1
- Wyświetlenia
- 1394
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a print in place hinged glasses case. I recently bought a nice pair of glasses that only came with a soft case and I decided making my own hard case would be a great way to practice print in place hinges.
This model uses four (4) 10x5x2 rectangular neodymium magnets which can be found at the following link.
https://www.amazon.com/gp/product/B07KP9NNZ6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
I am going for an unsupported PETG print but am struggling to make the overhangs on the case halves a decent quality while still keeping the bridges inside the hinges from fusing solid. The attached G-code file prints fine with PETG but the interior top and bottom faces of the case are a little lacking.