Tri Rod - The Legend of Zelda: Echoes of Wisdom
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here's my version of the Tri Rod, Zelda's magic wand in The Legend Zelda: Echoes of Wisdom.
- Ocena
- 5 / 5
- Polubienia
- 60
- Pobrania
- 366
- Wydruki
- 3
- Wyświetlenia
- 1437
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Standard Digital File License
My wife planned to dress up for Halloween as Zelda “in disguise” as she appears in The Legend of Zelda: Echoes of Wisdom, and it was my job to make the Tri Rod and Tri. Here's my version of a proper human-scale version of the Tri Rod! The in-game Tri Rod would be weirdly thick and cartoonish if simply scaled up to a full human's size. So, I took some liberties with the midsection and stretched it out to be a little more like a staff than a rod. This makes the proportions a bit different from the in-game chibi version, but I think this works better for cosplay.
This Tri Rod is about 72 cm long, and that means you probably need to split it into multiple parts in your slicer. I printed mine in three parts, but my OrcaSlicer is having difficultly exporting STLs of my split parts. Apparently the geometry's booleans are too complex to export. So, I have simply included the whole base model here in one unbroken piece.
Originally I modeled this to be just the top and bottom parts to be joined by a length of PVC pipe, and I actually printed and assembled one set like that, but I wasn't satisfied with how it felt. This final version has a slight taper from top to bottom along the midsection, and the top and bottom twists blend seamlessly into it. I only mention this to warn that you can't just cut the middle out of this model and put a straight tube between the ends; they won't match up.
Like my Tri model, I super-glued my printed parts together with dowels. Once the glue cured, I mixed cheap acrylic craft paints with water and isopropyl alcohol to feed into my cheap airbrush (thanks, Harbor Freight) to coat it with a smooth gradient from a slightly off-white yellow at the top to bright yellow through most of the rod to dark green covering the pommel-like bottom end. I really do think taking the time to use an airbrush perfects the in-game look. You could probably simulate the gradients with a million filament changes, but I wouldn't advise it.