1 / 3
Tri Rod - The Legend of Zelda: Echoes of Wisdom — image 1
1 / 3

Tri Rod - The Legend of Zelda: Echoes of Wisdom

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Here's my version of the Tri Rod, Zelda's magic wand in The Legend Zelda: Echoes of Wisdom.

Rating
5 / 5
Likes
60
Downloads
366
Makes
3
Views
1,437
Reviews
1

Updated at source:

Model information

Category
Props
License
Standard Digital File License

My wife planned to dress up for Halloween as Zelda “in disguise” as she appears in The Legend of Zelda: Echoes of Wisdom, and it was my job to make the Tri Rod and Tri. Here's my version of a proper human-scale version of the Tri Rod! The in-game Tri Rod would be weirdly thick and cartoonish if simply scaled up to a full human's size. So, I took some liberties with the midsection and stretched it out to be a little more like a staff than a rod. This makes the proportions a bit different from the in-game chibi version, but I think this works better for cosplay.

This Tri Rod is about 72 cm long, and that means you probably need to split it into multiple parts in your slicer. I printed mine in three parts, but my OrcaSlicer is having difficultly exporting STLs of my split parts. Apparently the geometry's booleans are too complex to export. So, I have simply included the whole base model here in one unbroken piece.

Originally I modeled this to be just the top and bottom parts to be joined by a length of PVC pipe, and I actually printed and assembled one set like that, but I wasn't satisfied with how it felt. This final version has a slight taper from top to bottom along the midsection, and the top and bottom twists blend seamlessly into it. I only mention this to warn that you can't just cut the middle out of this model and put a straight tube between the ends; they won't match up.

Like my Tri model, I super-glued my printed parts together with dowels. Once the glue cured, I mixed cheap acrylic craft paints with water and isopropyl alcohol to feed into my cheap airbrush (thanks, Harbor Freight) to coat it with a smooth gradient from a slightly off-white yellow at the top to bright yellow through most of the rod to dark green covering the pommel-like bottom end. I really do think taking the time to use an airbrush perfects the in-game look. You could probably simulate the gradients with a million filament changes, but I wouldn't advise it.

Tags