1 / 4
IKEA Skadis/Skådis Tape Gun Holder / Tape Dispenser / Klebebandabroller — zdjęcie 1
1 / 4

IKEA Skadis/Skådis Tape Gun Holder / Tape Dispenser / Klebebandabroller

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Holder for a packing tape dispenser on an IKEA Skadis board.

Ocena
4,9 / 5
Polubienia
42
Pobrania
322
Wydruki
10
Wyświetlenia
1150
Oceny
10

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial

A holder for my Hornbach packing tape dispenser designed for the IKEA Skadis board. It will likely also work with other brands or similar tape dispensers.

You will additionally need two of the following hooks:

https://www.printables.com/model/635620-skadis-skadis-universal-peg

First, attach the hooks to the Skadis board, then snap the main part onto them.

Print settings:

  • Material: PLA
  • Walls: 4
  • Infill: 25% Gyroid
  • Printed lying down without supports (the cutouts for the hooks are slightly wider, so minimal sagging during bridging is not an issue)
  • Printer: Bambu A1

--------------------------------------------------------

Eine Halterung meines Hornbach Packband Handabrollers für das IKEA Skadis Board. Funktioniert vermutlich auch für andere Marken / ähnliche Modelle.

Man benötigte zusätzlich 2 der folgenden Haken:

https://www.printables.com/model/635620-skadis-skadis-universal-peg

Zuerst die Häken im Skadis einhängen und dann das große Teil aufklicken.


Druckeinstellungen:
PLA, 4 Wände, 25% Gyroid Infill
liegend ohne Support gedruckt (die Aussparungen für die Häken sind etwas breiter, sodass minimales Durchhängen beim Bridging kein Problem ist)
gedruckt auf Bambu A1

Tagi