Neptune 4 Pro Display Tilt Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Design to mount the Neptune 4 Pro display outside of my printer enclosure and to be able to tilt it up to 90 degrees.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 36
- Wydruki
- 1
- Wyświetlenia
- 281
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Design to mount the Neptune 4 Pro display outside of my printer enclosure and to be able to tilt it up to 90 degrees.
I used m4x25 bolts with press fit knobs from https://www.printables.com/model/472195-thumb-screw-knob and superglued m4 nuts to the original magnetic display mount for the printer. I mounted it to my printer table with #10 construction screws.
Filament is Overture PLA Matte Grass Green
Print Settings:
Printed with slotted section face on the print bed so I got a good slot. I didn't use supports.
0.2 Layer Height
20% Infill
4 Walls and 4 layers top and bottom, probably overkill.
Hardware used:
2 - m4 X 25 hex socket cap bolts
2 - m4 washers
2 - m4 nuts (super glued to original mount
2 - #10 1 ¼" Spax construction screws.
2 - m4 size knobs from (link above).