Liczymy pasujące modele…
A much needed tilt lock for the: Phone Holder, smooth tilt adjustment, prints in place by E. Soderberg Here's a simple addition to the phone holder that allows you to lock it. Just slide it on when you need it. When you're done, switch it…
A strong clamping vise that is setup with a rotating and tilting ball joint, allowing you to securely hold objects up to 11 cm wide at the perfect angle. The jaw faces are setup to be interchangeable, and the hollow base has a threaded…
This is a tilting style mousetrap with an adjustable magnetic release for a snap action. The counterbalance weight is also adjustable. I designed it to work with pennies, but the two threaded plugs can sandwich any type of mass and allow…
I was thinking about picking up a Panavise to help with some of my soldering and other project work, and then decided to try to model out something that could be 3D printed instead. My goals were to create a vise that felt nice and smooth…
A heated insert version of http://www.thingiverse.com/thing:3166165 Hardware: ** if making the main body in 2 parts you will need 2 m6 by 25 cap head screws for attaching the top to the bottom body sections * M10 threaded rod for the main…
Filament guides I have seen require the filament spool to be located directly behind the printer. However, users with dry boxes or other storage solutions often need a more flexible solution such as placing the spools on the side of the…
BOM: Waveshare 5" DSI screen 2 x M2 self-tapping screws 2 x M3*12 BHCS or SHCS 2 x Heatset Insers (M3x5x4) Print the 3 parts and assemble according to the images. The parts are all in the proper orientation for printing. If printing the…
A leveling foot with a ball joint to tilt the base of the foot on sloped or uneven surfaces. Four of these and a 20x100cm plywood sheet let me put plants upright on a 5° slanted outside windowsill. The ball has a M5 thread, so that you…
This is a DIY project requiring some electronics, soldering, Arduino IDE and basic knowledge uploading code to a compatible board You can follow all the relevant step by step on my blog page here:…
I designed this mound for my little LG projector. It has a regular camera tripod mount nut. Print Settings Printer: Graber i3 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Grid Filament: Generic ABS Blue Notes: I printed it with 5…
Seeing the new Fanatec podium pedals with the fancy heel cups made me want some, however they don't exist for sale yet. I also didn't want to spend like 2k AUD on Simgrade VX pros when I have a 3d printer and some stubbornness along with…
This is a tilting pencil holder set I designed for my wife based on a case of colored pencils that had one built in. Put the long side forward for better balancing with the pencils tilted down, or to the back for spacing away from the…
I was inspired by the Revopoint automatic dual-axis turntable, and designed this manual one. The separate ring is for easy printing and eliminates the need for support. The base and dome do not require much infill - I used 4%. For…
I took the ideal of the space saver screen mount that I made a remix from ( https://www.thingiverse.com/thing:5560213 ) but wanted to be able to see the screen through my camera mounted on the left of the machine. This gives the screen…
This accessory/remix of my vise model provides a speed control handle for quickly opening and closing the clamping vise jaws, offers easier fine tuning, and is also ideal if you're working with gloves. You'll need to print the vise first…
Bill of Material (BOM) 2pcs M2x5 mm Screws 2pcs M2.5x12 mm Screws 2pcs M2.5 Nuts
All the other print sheet holders out there are difficult to use. I wanted something better. So, I created the pivoting print sheet holder! Holds 4 print sheets. The parts are meant to be held down by magnets. Magnets to hold the base in…
Two part tilting holder for your Unifi G6 Instant camera. Great camera, just kind of limited as to where you can set it up without the side-mounted holder. This design tries to achieve a large degree of tilt, so you can even place it up…
Adjustable screen Bracket for Anycubic Kobra Max. requires M5 bolt and nut or SAE equivalent Fusion 360 files included Category: 3D Printer Parts
Why? If you have a 1UP rack there's a 99% chance your license plate is obscured. I know that's bad, but I wasn't about to pay $125 CAD for the basic plate holder from 1UP. Instead, I made this! Read Me Something something provided as-is,…
A tilting print sheet holder for the left panel pocket of your Prusa CORE One. Based on the very practical design of Girak . Holds 4 print sheets. The parts are meant to be held down by magnets. Magnets to hold the base in place and a…
Needing a tilting mechanism for my Revopoint Turntable, I designed this tilting mechanism based on a Gear. This way you slide the mechanism in one of the three angles and you can scan away. I seperated the ring from the rest, making it…
Helps mount a stepper in blinds and control the tilting. Based on Everything Smart Home's video linked below. I am not associated in any way to the above video. I used it as a guide to automate my blinds. Hardware: ESP -…
Harris Tilting Bipod tilt lock lever for the new style large diameter ribbed knob. Hardware: 1x M4x20 button head cap screw 1x M4 nylock Please see my other designs for a lever for the old style small knob.
A mashup of E. Soderberg 's excellent phone holder and Mike 's Slotty Storage so that you can mount one onto the other. I recommend using “smart fill” paint-on supports only for the underside faces of the added mounting rails. It's a…
Elegoo Centauri carbon filament sensor tilting support, It can be installed on the same original sheet but by changing the screws for slightly longer ones. Separate the sensor and tilt it to facilitate filament insertion.
its made for M3 screw , the fitment is wery tight , but it fits.
All same as original, with different side plates to fit Simsonn Pro Plus pedals. Please find all other required parts for the heel rest on the original design page. Note: Unlike the original, you will need to print the left and right.…
required hardware: 2pcs M2.5x12 mm Screws 4pcs M2.5x5 mm Screws 4pcs M2.5 Nuts 1pcs usb to JST 1.25 4-Pin Connector
Hot NEWS! I have released a version with opening jaws and moving arms (for table flips). I was unable to test these features on my old Prusa i3 so please let me know if they are too tight. This model is not suitable for small children!…
Here's a case for the HDMI7. I remixed it to fit my upcoming vcore4 build. You need : 2x M6 locking nuts 2x M6 HexScrews 30mm Add a pause during printing to embed the m6 locknuts into the knobs.
Remix of file by almidi on thingiverse Tilts Logitech Craft Keyboard to about 20° - 25mm high in the back
The print-in-place hinged back support self adjusts to the phone's angle. The cutout was also added to the front ledge to allow swipe-up gestures near the bottom without removing the phone. Both parts print together on their side as one…
An ice scraper designed for the 2023 Defrosting Cars contest, It has a handle and snap in blade that freely moves to allow the blades to follow the contour of the windscreen effortlessly. Blade can be easily replaced with another design…
The Fusion 360 file has some parameters to adjust the pcb size, stand thickness and screw size
use 20mm diameter PVC pipe (electrical pipe in Europe), cut them at the right dimension for your panel and insert corners, and middle parts. use M6 screws and nuts to fix the corners and the middle parts attach a small rope to keep the…
printed in PETG or ASA will do. It is going to be a 100% infill print as there is not much filament needed.
This case is more or less a set of replacement parts for the most common acrylic case sold for housing the DIY GM328 component tester. While it includes replacement parts for all the acrylic parts of the original case, with exception to…
(Photo is rough idea not actual product).
This is a simple 3D printable model of the acrylic case I originally purchased with my LCR-T4 transistor tester. This kit includes replacement parts for each of the clear acrylic parts that came with the acrylic case. As with my GM328…
Fits microscope stand with 12mm hex bolt. Printed in PLA with 6 perimeters & 6x0,2mm layers
This base allows you to set your efog.tech Endgame trackball at an angle. It connects to the Endgame with a collar, allowing you to rotate it to adjust the tilting and tenting. As you rotate the base, you'll raise one corner while…
https://www.amazon.com/wisecoco-No-Cable-Needed-Dual-Speaker-Touchscreen-Drive-Free/dp/B0C7BYHN5C/ref=sxin_14_sbv_search_btf?content-id=amzn1.sym.6ca944f8-539c-499e-a3a4-26a566d1de59%3Aamzn1.sym.6ca944f8-539c-499e-a3a4-26a566d1de59&crid=2F…
90 degree standard 1/4-20 UNC tilting adapter with a GoPro style joint Additional hardware: Arm: 1x ¼-20 UNC hex bolt or nut. Base: 1x ¼-20 UNC hex bolt or nut. 1x M5 hex nut. Optional: M5x18 bolt or GoPro thumb screw.
Adjustable Phone Stand (Tilting, M5 Hardware) A simple, sturdy phone stand with adjustable tilt (multi-angle positioning). The angle is locked by friction using two M5 joints , so you can set it exactly how you like for desk work, video…
Blinds in my apartment came with those little “clips” to hold them when window is tilted. But original plastic just broke after few years, so I had to make this replacement part. Had them printed in PLA, works fine for over a year now.
A simple wall mount to store four REVO tilting adapters for the Bessey K Body clamps.
I couldnt find it online, so I created it by myself. The distance for your hand is 100mm. The screw holes have a diamter of 4mm and a 45° chamfer with 9mm max. diameter. If you enjoy this design and it gives you benefit in your life,…
Replacement part for a tilting knob for box fan Black and Decker model FB40-9H I have printed it with 0.6mm nozzle, but I recommend 0.4mm. 3 walls for rigidity with 40% infill
A simple, side-tilting cell phone holder for use in bed or on the couch. With easy switching from left to right. The holder has a bar at the front to give the holder more stability when supporting it in the bed. Lateral tilt: 30° Tilt…
Svuotatasche da tavolo basculante con trama voronoi formato da 4 pezzi indipendenti e stampabili singolarmente. Stampato con nozzle 0.4 altezza layer 0.2 larghezza layer 0.44 Printed with nozzle 0.4 layer height 0.2 layer width 0.44…
If your headlight tilting knob on Skoda Felicia breaks, you can use this to reinforce it. I've printed it with ASA filament and used superglue to fix it in place, also I have sanded both surfaces with metal file to have stronger bond.
Want your WinWing MCDU to sit on a desk at an angle different than the built in stand? Want to be able to tilt it? Yep, I did, sure it's not true to life like in the cockpit, but my desk is not the same as an Airbus cockpit either……
These are the pieces I designed to add servo-tilting functionality to my HGLRC Veyron35 CR Pusher. I consider it strictly to be a prototype, so for more context on how and why, please watch this YouTube video which explains the reasoning…
This is a low profile tilting stand for the GM328 electronic component tester, designed to work with the most commonly used acrylic case. Included is a replacement part for the acrylic bottom plate and a copy of the stand I originally…
I needed an organizer that would fit an overhead hinged door and I came up with this tilt-up organizer to keep print stuff handy. -Print the organizer with layer height 0.28mm, infill of 20% or more, wall loops of min 2, top layer min 2…
Printing print on the side no supports needed any material layer height can be tall nozzle size: 0.4mm and larger Parametric adaption to change the parameters of the model to your needs install FreeCAD open .fcstd File go to Spreadsheet…
These Vici/Vichy VC87, VC97, and VC99 meters quite a lot wrong with them, but if it's the meter you have, I suppose we'll just have to make the best of it... My biggest pet peeve with this meter is the horribly designed, manufactured, and…
I had to do a systems inspection of a railway maintenance yard and thought the tilting CCTV poles would look funny as a pen. I work in security and I was approved to be there and take the photo's. Please don't go wandering through railway…
I wanted to build a programmable mechanical keyboard without an unfamiliar layout requiring me to re-learn how to type all over again. There are a few commercial options that almost fit the bill, but the only fully-programmable one isn't…
Simple remix, where I just added and positioned 2 resized negative cubes. Apparently, due to mesh issues with the original model, I am unable to "Export as one STL" (Orca just crashes to desktop) and just give you the model, hence the 3MF…
This case is more or less a set of replacement parts for the most common acrylic case sold for housing the DIY GM328 component tester. While it includes replacement parts for all the acrylic parts of the original case, with exception to…
Set the tilt angle of a tall dressing mirror. The rear bracket fits over the back of the frame, whereas a small bracket, holding the front, is screwed into the bottom rear of the tiltable mirror. build123d model file allows you to change…
Keebio Sinc tilt /tent design. All variant of right half are viable with the drop in (removable) arrow key spacer and the encoder drop in mount/cover. The left half is non macro. I used 10mm hex M2.5 standoffs for all mount points along…
This is a simple 3D printable model of the acrylic case I originally purchased with my LCR-T4 transistor tester. This is remixed from my original design and is intended EXCLUSIVELY for multi color/material machines. If you're looking for…
The stand is designed in 4 parts to be glued with super glue. Standard printer settings should work without anything specific (no support, 0.2 mm PLA is fine)
A classic American-style long-nose semi truck tractor you build yourself. An original design (no brand logos) at about 1:32 scale: 221 mm long, 84 mm wide and 126 mm tall to the tops of the exhaust stacks. WORKING PARTS Steering: the…
Fits with the following 200ml silicone amazon container (referral): https://amzn.to/4pZ0XaN
A compact case and tilting desk stand for the InnoMaker 1080P USB2.0 UVC camera (130° wide angle, 32 x 32 mm PCB, M12 lens). The camera board sits in a small housing with a front bezel and a vented rear cover. The housing tilts in a…
What it is A mount that carries a portable monitor on one leg of a photo tripod and lets it tilt from -30° to +30°, continuously. The monitor needs no VESA pattern : it sits in the frame. Prototype status — testing in progress: this model…
A customizable, parametric mechanical linkage-jack teaching model built entirely in TrueGeometry Playground. One driving variable, $TILT, sets the column angle and the whole 63-part mechanism re-poses: base on casters, A-frame posts,…
You'll find explanations in french on my website : https://labidulerie.vicou.be/rehausseur-de-charge-electronique-kunkin-kp-184-en-impression-3d/ Designed to avoid supports. Two holes for the device feet
A small enclosure for a DIY infrared remote (e.g. ESPHome / Home Assistant) that sits on top of a cupboard and tilts to aim at a ceiling fan or lamp. Three parts, no supports, prints in about an hour. Fits exactly: - Seeed Studio XIAO…
Design goals Printability first : every part prints flat and without supports on any standard FDM printer, in PLA or PETG, with no special tools or hardware required. Modular and tool-free: a few simple parts snap together, so the…
All the other print sheet holders out there are difficult to use. I wanted something better. So, I created the pivoting print sheet holder! Holds 4 print sheets. The parts are meant to be held down by magnets. Magnets to hold the base in…
Fits with the following 200ml silicone amazon container (referral): https://amzn.to/4pZ0XaN
This base allows you to set your efog.tech Endgame trackball at an angle. It connects to the Endgame with a collar, allowing you to rotate it to adjust the tilting and tenting. As you rotate the base, you'll raise one corner while…
Adjustable Phone Stand (Tilting, M5 Hardware) A simple, sturdy phone stand with adjustable tilt (multi-angle positioning). The angle is locked by friction using two M5 joints , so you can set it exactly how you like for desk work, video…
A tilting print sheet holder for the left panel pocket of your Prusa CORE One. Based on the very practical design of Girak . Holds 4 print sheets. The parts are meant to be held down by magnets. Magnets to hold the base in place and a…
🚀 Support My Work🚀 If you enjoy my designs, you can help me keep the creative spark alive: Post a Make: Seeing your prints is the best reward! It also helps me earn Prusameters to keep the filament flowing. 💎 Like & Download: Your…
I bought a very nice spacious breadboard on Amazon: https://www.amazon.com/dp/B0CQVKQPPL?ref=ppx_yo2ov_dt_b_fed_asin_title Unfortunately there were not legs to tilt it thus, well, neck pain. So I designed these and made them tight enough…
Recommended printing orientations are shown in the picture. Organic (tree) supports on the build plate only. Brims recommended. You may move the prop down a little, like 0.2mm, to create a larger contact surface and more stable printing.
I use a WALI Tilting Monitor Wall Mount to mount my 17 inch portable monitor on the wall. The way it is made with the V shaped channels makes it an excellent quick release mount that I can slide out to take the monitor with me when I…
Printed using PLA with 4 perimeters. Use superglue to bond the plate and the pin.
This is a simple hook that slips over the top of a tilting window (typically found in Germany). My windows are 20 mm thick at the top and it fits perfectly. The window can still be closed with the hook attached. I didn't test how much…
This base tilts the Dyson CF1 forward so it can be angled down further than the base normally allows. For example if it is on a bedside table it can point down to you lying in bed. It is sturdy and designed so the lip does not stop the…
This is an update to my original rod puppet model, I have added a rod connector with a pin hinge so the head now tilts back. There is a loop to attach a string at the back of the head and a small hole the back of the jaw to add an elastic…
Important: Slide the holders into the box with the high end of the insert to the back of the box . If this is placed incorrectly, the lid will not hold the insert in place. Insert the insert retainer into the slot into the box bottom to…
🚀 Support My Work🚀 If you enjoy my designs, you can help me keep the creative spark alive: Post a Make: Seeing your prints is the best reward! It also helps me earn Prusameters to keep the filament flowing. 💎 Like & Download: Your…
UPDATE 2: The VESA to tripod ball mount was not included. That has been uploaded. UPDATE: I had the wrong files u/led, it has been corrected. My apologies. Note: I trimmed the VESA-to-tripod mount so it no longer sticks out around the…
The STLs for my “Rotating Tilting Weighted Vise” model can be freely downloaded from the following page: https://www.printables.com/model/821928-rotating-tilting-weighted-vise For my club supporters though, the full source Fusion360 file…
This is a remix of the threaded rail to clamp wider items.
This 3D model provides a replacement for the tilting scissors mechanism in basement windows. It's ideal for when the original part breaks after prolonged use or due to water pressure in the window well. Typically, only the connecting…
