Rotating Tilting Weighted Vise
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fully printable strong vise with rotating and tilting axes, setup to be optionally filled with sand for a nice weight.
- Ocena
- 5 / 5
- Polubienia
- 699
- Pobrania
- 1248
- Wydruki
- 18
- Wyświetlenia
- 5896
- Oceny
- 16
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
A strong clamping vise that is setup with a rotating and tilting ball joint, allowing you to securely hold objects up to 11 cm wide at the perfect angle. The jaw faces are setup to be interchangeable, and the hollow base has a threaded plug so that it can be filled with sand to give it a nice balanced heft.
This is a fully printable design, so no other hardware is needed. All parts have been designed so that no supports are required, and the STLs are oriented as they should be for optimum strength. Recommend increasing the wall count and infill for at least the “pivot clamp”, “pivot shaft”, and “shroud” pieces, as they support the most force.
Update: an alternate base option is now also provided which you can use if you'd prefer to attach the vise to a work bench instead of using the weighted base (see the second of the featured pictures).
