Liczymy pasujące modele…
A press fit wheel to help spin your Panavise Jr jaw screw a little faster. Should seat snugly with a little pressure, no fasteners, snaps, or glue required! Print instructions Category: Tools Summary A press fit wheel to help spin your…
Made these to replace some old beat up pads. They fit right in and they should be able to hold things a bit better than the originals. 2 1/2in wide. Print with a 100% infill for best results. it shouldn't need any supports either. Print…
I recently got a Panavise and saw some helping hands attachments, but they were more than I wanted to spend so I designed my own. For the arms I bought 10 flexible arms for about $5 at…
The original metal “jaws” my Panavise came with are not properly straight, so the vise would always be closed at the bottom and open at the top. Also the rubber that goes over the metal paddles is not really suited for properly gripping…
This is a Speed Wheel for a Panavise Jr. I recreated the wheel and added retention nubs to it. I found that the one sold by Panavise would occasionally fall off if you're spinning quickly. This one has a tight fit and won't come off until…
This 4x4 Gridfinity plate is for mounting the Original Panavise Base Model 300 and the low profile Panavise Base Model 305. The 2 threaded holes are for the Loc Line hose connectors with a 1/2in NPT pipe thread. Not tested with Generic…
These are replacement pads for the Panavise 303 vise. It has groves to hold tubular objects. I've printed it in semi-flexible filament, but works fine printed in PLA. Support is not needed if printed with groves on top. An infill of 20%…
Update 12/11/19: Updated files all over the place with updated naming to account for sizes. All versions now have 12 holes meant to be tapped out to 1/4NPT to mount coolant tubes for helping hands, eliminating the need for stacking…
The PVSolderFingersRemix file is a combining of designs by Anthsorr and sanricstu, resulting in a pair of wide jaws with soldering fingers that can be slipped over the standard jaws of a Panavise 301 vise head. The second file…
Slip on jaws for Panavise Jr. Useful for holding larger items such as connectors etc for soldering. Category: Parts
A base with trays for the Panavise Junior Vise
Panavise Fixturing Head designed to fit Panavise 300 series bases including early models manufactured by Colbert and Hunter Industries. Slots are desired to particularly fit ¼” carriage bolts but any ¼”, or equivalent metric screw/bolt…
A replacement vise jaw with a centering feature for the PanaVise model 301. Print 2 at 100% infill.
Ring for the Panavise Parts Tray Base, PV-312. Add a few flexible coolant hoses and a couple alligator clips and your panavise base becomes twice as useful. How I Designed This Designed in Autodesk Fusion360. Category: Electronics
Panavise helping hand using lock-line parts Instructions will add full build list soon Category: Electronics
A wall mount (more of a storage cradle) for the Panavise equipped with the 312 Tray Base. The design should not interfere with any helping hands on the edges of the tray, but this has not been tested. Print instructions Category: Tool…
I had a panalock 350 that wasn't usable in its current state for locksport. Did some measurements a few revisions and here we go, a no longer unusable vise for lockpick practice. Pick responsibly. Revision Holds Locks properly and…
These replacement jaw pads include soldering fingers, turning your already precisely positionable PanaVise into helping hands. Best used when soldering two wires together. Print with 100% infill. Works well with PLA, but higher temp…
Added a ball joint to attach a ball and socket arm.
Been looking for a use for a nice chunk of aluminum, while at the same time wondering how to address the limitations of my Panavise Jr's suction cup. Voila! I've found the suction cup only works well on clean smooth surfaces, so I had to…
This low-profile phone holder fits iPhone 8 & iPhone 7 phones using the Otterbox Defender case. Full access to the data/charge port while docked. The screw holes are spaced for the Panavise InDash series vehicle mounts. Print instructions…
Remixed with 1/8 BPTS holes, as the coolant lines I got had that threading instead of the 1/4PT that the original model had. Printed in PLA at 0.2 layer height, threads work fine, a little tight.
Wall mount for storing a PanaVise Base Tray 312. Base and cover are printed seperately and joined with super glue. Mounting holes can be accessed through the front vent holes.
This was loosely inspired by a 4x4 Gridfinity Panavise mount that I saw here , but I have a PV Jr. , and I figured that I could get it in 3x3. I also wanted a home for the control wheel , which I kept losing. Also inspired from that, I…
I love my Panavise Jr. I’ve used it to hold just about anything you can imagine and it always works like a champ. I do however have one small complaint, it takes forever to open and close. The threading on the threaded rod that opens…
This is an upgrade to the Panavise 209 vacuum base PV Junior vise. This vise is pretty convenient except that it has one problem, after a short while the base leaks, or the surface is not smooth enough and it won't hold with its suction…
This is a set of PCB (circuit board) holding jaw pads for the PanaVise 366 or 376 vise. They slide onto the existing jaws and attach using common 5mm x 10mm computer fan screws, so there's no need to remove the jaws themselves just to…
Replacement jaws for an old PanaVise. Make sure your vise has 42.5mm screw spacing, otherwise it won't fit. I printed this with 4 perimeters for strength.
This is an end cap for rod on a Panavise Model 315 circuit board holder . The edges on mine were a bit sharp, so this sticks into the ends to blunt them. The fit will be a bit tight, but a rubber mallet should help coax them in. Printer:…
This is a remix of the "Helping Hands for Panavise" by sprior. Sprior's STL was over 300k triangles so, to open in Tinkercad and remix, used Meshmixer to get down to Tinkercad's 300K limit. This version is intended to be used with the…
This is a 4x4x2 Gridfinity base designed specifically for PanaVise tool mounts . Tested with the PanaVise 301 Standard. It combines the modular efficiency of the Gridfinity storage system with the stability and versatility of a PanaVise…
Print with 100% concentric infill
I wanted a beefier set of jaws for my Panavise 366 vise head. One face is designed to better hold round rod or wire. I tried them on two 366 vise heads. Easy fit on one and snug fit on the other. I recommend a bit of dry lubricant on the…
adapts a wood lathe chuck to a Panavise jr. uses a 10.8mm rod for strength for: https://www.amazon.ca/PanaVise-Model-
This is a remix of Adafruit 's Helping Arm Attachment for Panavise Jr (which is a remix of this Helping Arm Attachment for Panavise Jr by XYZAidan ), and changes the helping-hand screw socket for a socket that supports the articulated arm…
This part was created for an acquaintance who needed to replace a missing part for his Panavise 300. Since I also have a PanaVise 300, I was able to dis-assemble the vise so I could measure and model the missing part. The photos show the…
A wrench for the tri-wing knobs on Panavise PCB Holders (and possibly others).
My Standard Panavise Jaws have become worn. Making 3D printed replacements seemed an obvious solution. Along with each of the usual jaw types I also added one with vertical slots for holding wires. Included: Simple rectangular jaws Jaws…
These adapters are designed to work with the "soft jaws" linked below which are good for doing fine work on suspension fork/shock dampers, etc or other tubular items. You'll still need a bench vice or stand for removing air chambers or…
This design adds a bottom plate and then a 1 inch air gap up to the PanaVise 301 base's bottom, aka the PanaVise Model 300 Standard Base. This gap allows for clamps to be positioned under the PanaVise rather than beside it. This means the…
I made a better knob for my panavise 376. Printed without supports with red TPU95A filament on an ultimaker 3 with 0.8mm nozzle.
Simple adapter to connect a SmallRig crab clamp to a Panavise base. For assembly you will need one 1/4-20 x 2-1/2" bolt and 2-3 washers.
I made a better knob for my panavise 376. Printed without supports with red TPU95A filament on an ultimaker 3 with 0.8mm nozzle.
This design adds a bottom plate and then a 1 inch air gap up to the PanaVise 301 base's bottom, aka the PanaVise Model 300 Standard Base. This gap allows for clamps to be positioned under the PanaVise rather than beside it. This means the…
Replacement jaws for an old PanaVise. Make sure your vise has 42.5mm screw spacing, otherwise it won't fit. I printed this with 4 perimeters for strength.
