4x4 Gridfinity Panavise Base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
4x4 Gridfinity Base with holes for helping hands.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 558
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This 4x4 Gridfinity plate is for mounting the Original Panavise Base Model 300 and the low profile Panavise Base Model 305. The 2 threaded holes are for the Loc Line hose connectors with a 1/2in NPT pipe thread. Not tested with Generic flixible arms. The holes in the base for mounting the Panavise are sized for M5 heat set inserts, as that is what I had on hand. There are also 3 convienient built in trays for solder, heat shrink or small parts so as to not get misplaced.
Thank you to Zack Freedman for designing and releasing the parametric template files for this Organizer System.
You can see his original video here
And His Followup where he showcases blocks designed by the Gridfinity Community