Wall Cradle / Wall Mount - Panavise with Tray Base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wall mount (more of a storage cradle) for the Panavise equipped with the 312 Tray Base.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 286
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
A wall mount (more of a storage cradle) for the Panavise equipped with the 312 Tray Base.
The design should not interfere with any helping hands on the edges of the tray, but this has not been tested.
Print instructions
Category: Tool Holders & Boxes Summary
A wall mount (more of a storage cradle) for the Panavise equipped with the 312 Tray Base.
The design should not interfere with any helping hands on the edges of the tray, but this has not been tested.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
</div>Rafts:No
Supports:
Yes
</div>Resolution:0.2
Infill:
20%
</div>Filament:
[
Prusament PLA Galaxy Silver
Perimeters: 2
I used supports but you may be able to get away with less / no supports if your printer has decent bridging. The zigzag supports add ~20% / 30g to the print. Using tree supports in Cura had marginal improvement.
Filament Used (with the above settings): 120 g w/o support, ~ 150 g w/ supports
Time to Print (with the above settings): 10 hrs w/o support, 13 hrs w/ supports