Panavise Jaws and Soldering Fingers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The PVSolderFingersRemix file is a combining of designs by Anthsorr and sanricstu, resulting in a pair of wide jaws…
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 47
- Wydruki
- 1
- Wyświetlenia
- 440
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
The PVSolderFingersRemix file is a combining of designs by Anthsorr and sanricstu, resulting in a pair of wide jaws with soldering fingers that can be slipped over the standard jaws of a Panavise 301 vise head. The second file PVSolderFingersV2, is remixing Anthsorr's clamp pads with solder fingers so they can be screwed directly on to the 301 head as a set of replacement jaws. This gives the option to have a slimmer jaw profile if desired. The V2 jaws pictured were printed at 75% in the X axis, leaving Y and Z at 100%. If printed at full 100%, you may need longer screws. I'm not certain as I've not done it yet. Both were printed in TPU but should work well in PETG or PLA if you desire a harder jaw face. V2 needs no supports. The slip-on version does require supports.
Print Settings
Printer:
Ender 3 S1
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
100%
Filament:
Overture TPU
Black
Notes:
The V2 version does not require supports. The PVFingersRemix does need support for the portion that slips over the original jaws. What worked best for me was a tree support at 85 degrees in zigzag.
Category: 3D Printing