1 / 7
Panavise Jaws and Soldering Fingers — image 1
1 / 7

Panavise Jaws and Soldering Fingers

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The PVSolderFingersRemix file is a combining of designs by Anthsorr and sanricstu, resulting in a pair of wide jaws…

Rating
5 / 5
Likes
9
Downloads
47
Makes
1
Views
440
Reviews
1

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution

The PVSolderFingersRemix file is a combining of designs by Anthsorr and sanricstu, resulting in a pair of wide jaws with soldering fingers that can be slipped over the standard jaws of a Panavise 301 vise head. The second file PVSolderFingersV2, is remixing Anthsorr's clamp pads with solder fingers so they can be screwed directly on to the 301 head as a set of replacement jaws. This gives the option to have a slimmer jaw profile if desired. The V2 jaws pictured were printed at 75% in the X axis, leaving Y and Z at 100%. If printed at full 100%, you may need longer screws. I'm not certain as I've not done it yet. Both were printed in TPU but should work well in PETG or PLA if you desire a harder jaw face. V2 needs no supports. The slip-on version does require supports.

Print Settings

Printer:

Ender 3 S1

Rafts:

No

Supports:

Yes

Resolution:

.2

Infill:

100%

Filament:

Overture TPU

Black


Notes:

The V2 version does not require supports. The PVFingersRemix does need support for the portion that slips over the original jaws. What worked best for me was a tree support at 85 degrees in zigzag.

Category: 3D Printing

Tags