Rotating and Tilting Vise Speed Control Handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Faster jaw movement and fine tuning control for your rotating and tilting vise.
- Ocena
- 5 / 5
- Polubienia
- 110
- Pobrania
- 163
- Wydruki
- 1
- Wyświetlenia
- 1300
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This accessory/remix of my vise model provides a speed control handle for quickly opening and closing the clamping vise jaws, offers easier fine tuning, and is also ideal if you're working with gloves.
You'll need to print the vise first, and then you can simply swap out the upper knob with this handle instead. Similar to the vise, I've included both a version of the handle that should fit on a standard M6 or ¼ inch bolt.
The handle cap is designed with just a small amount of tolerance so that it fits on tightly, and may require a tap from a hammer to get it initially seated. You can certainly scale it up/down slightly as well for a tighter/looser fit depending on how your filament behaves.