1 / 2
Tilting organizer / Organizador basculante — zdjęcie 1
1 / 2

Tilting organizer / Organizador basculante

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A tilting organizer / Organizador basculante.

Ocena
0 / 5
Polubienia
5
Pobrania
15
Wydruki
0
Wyświetlenia
386
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

 

I needed an organizer that would fit an overhead hinged door and I came up with this tilt-up organizer to keep print stuff handy.

-Print the organizer with layer height 0.28mm, infill of 20% or more, wall loops of min 2, top layer min 2 and bottom layer min 3.

-Print arms with at least 30% infill.

-No brackets required.

 

If you like my designs give me like and share. If you like them a lot invite me to a coffee.

https://www.buymeacoffee.com/kjbturok

https://www.paypal.com/paypalme/ChinadlaConchinchina

 

 

ESPAÑOL

 

Necesitaba un organizador que se adaptase a una puerta abatible superior y se me ocurrio hacer este organizador basculante para tener las cosas de impresión a mano.

-Imprimir el organizador con altura de capa 0,28mm, relleno del 20% o más, bucles de pared de minimo 2, capa superior minimo 2 y inferior minimo 3.

-Imprimir los brazos con al menos un 30% de relleno.

-No necesita soportes.

 

Si te gusta mis diseños dale me gusta y comparte. Si te gustan mucho invítame a un café.

https://www.buymeacoffee.com/kjbturok

https://www.paypal.com/paypalme/ChinadlaConchinchina
 

 

Tagi