1 / 7
Ender 3 Pro ADXL345 Mount for stock model or with BL Touch — zdjęcie 1
1 / 7

Ender 3 Pro ADXL345 Mount for stock model or with BL Touch

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

ADXL345 mount for Creality Ender 3 Pro for input shaping with Klipper

Ocena
0 / 5
Polubienia
2
Pobrania
72
Wydruki
0
Wyświetlenia
388
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

A mount for the ADXL345 on an Ender3 Pro (should work on a standard Ender3 as well). It's not a remix of Thomas Strassers model, but I borrowed the idea and the dimensions and recreated it from scratch with these improvements:

  • larger parts for a better fit
  • rounded corners for a smoother look
  • version for hotend with BL Touch installed
  • use of M3 screws and nuts 
  • experimental use of printed bolts (without threads)

To prevent shortcuts on the ADXL345 board it might be required to add a printed washer if steel screws are used. Otherwise switch to printed screws or try the included bolts.

The printed bolts may work good or not, depending on the calibration and tolerances of your printer. I included 2 sizes, the final print size can be adapted by increasing the flow while printing

It might also be required to drill the holes. They are designed with 3.2mm which should be enough for M3 screws, but if your printer is not fully calibrated the diameter of the holes might get smaller

 

Tagi