Dupont Holder for 3 to 4 Connectors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of the Dupont holder with versions for 1-4 connectors. Includes new size for 28.15mm terminals.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 463
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a remix of the original Dupont Holder design. I wanted a way to keep my Dupont terminals organized, especially since they were just hanging around. After testing a few ideas, I decided to keep three connectors side by side for easy access.
I’ve made several versions to suit different needs:
- dupontHolderX3_v2_screws – 3 connectors with 2 screw holders
- dupontHolderX3_screws – 3 connectors with 2 screw holders for 6mm screws (not fully tested yet)
- dupontHolderX1_v5 – One connector
- dupontHolderX2_v5 – Two connectors
- dupontHolderX4_v5 – Four connectors
I also updated the design to fit terminals that are 28.15mm in size (the actual size of my terminals). The original design had smaller dimensions. So, I've added a V3 for this new size.
I’m also uploading the .step file if you want to adjust it for more than three connectors!
A huge shout-out to the original designer for the idea—I'm just copying, pasting, and tweaking a bit to fit my needs.
If you find my design useful or it inspires your next project, feel free to show your support with a coffee or a beer—cheers! 🍻☕